What are the common problems with tyre changers?

Question

Accepted Answer

Operators of tyre changers encounter multiple predictable faults. The machine refuses to start when the power cord, the on-off switch or the electric motor has failed. The turntable turns slowly or emits noise because the drive belt is worn, the shop air pressure has fallen under 150 PSI, the gearbox is worn or a wire is loose. The table stops short of a full revolution when the rotation switch or the motor itself is defective. The clamping jaws lose grip when dirt packs the sliding surfaces, when air leaks from the clamp cylinders or when the regulated pressure is too low. The bead breaker loses force if the tyre still holds air, if the breaker arm is out of alignment or if the air supply pressure drops. Foot pedals stay down or refuse to move when air leaks from hoses, when fittings are loose, when system pressure is low or when the pivot points lack grease. A digital pressure gauge goes blank once its internal battery is exhausted. The rim receives scratches when the plastic protector that covers the metal clamp is worn away, especially on low-profile tyres. Many of those faults never appear if the operator checks belt tension every week, listens for air leaks each day and adds grease to every moving joint at the interval the maker lists.

Automatic Tyre Changer Machine in Shillong

Automatic Tyre Changer Machine Products, Price, Specifications & Features in Shillong

Top Automatic Tyre Changer Machine Manufacturer and Supplier in Shillong

Frequently Asked Questions about Automatic Tyre Changer Machine in Shillong

Explore Automatic Tyre Changer Machine Nearby Cities

Make an Enquiry