Weiber Ro UV System

In laboratories for many analytical & biological procedures, analysis and instruments pure water is needed. This pure water is identifies in terms of laboratory grade water which is measured in water Resistivity. Resistivity is determined by the amount of ionic contaminations and by its Total organic CARBON Content. WEIBER RO+UV units are one such system which facilitates pure water according to ASTM standards.

Special Features:

• Type 2 RO, easy to operate & maintain.
• Suitable for Tap water (corporation water) and post RO.
• Compact system including Reverse Osmosis technology with super charge deionization resin to produce high quality
• laboratory � grade pure water.
• Easy to install.
• Designed to fit your space requirements.
• Effective membrane filtration that removes all types of water contaminations.
• Membrane is maintaining due to the manual flushing cycles.
• Pre treatment to prevent the membrane from scaling formation.
• The built in UV lamp is ideal for applications that require low bacteria levels.
• Online Conductivity meter to ensure the required water quality.

Working Principle:

PRE � TREATMENT : TO PROTECT THE SYSTEM

Spun Cartridge Filter

The micron cartridge filter is provided for fine filtration of suspended solids. Filter is good for the removal of relatively uniform sized particles throughout the body of the filter.

When to Replace a Filter Cartridge

As particles accumulate on a filter cartridge, flow through the filter becomes restricted. This restriction reduces the flow rate through the cartridge and increases backpressure Thus the Cartridge filter should be changed when the flow drop or pressure drop is considerable.

Granular Activated Carbon

The granular activated carbon to eliminate free chlorine and colloids present in tap water that may otherwise alter the taste and color of your water supply.

Spun Cartridge Filter

The micron cartridge filter is provided for fine filtration of suspended solids.

MEMBRANE TECHNOLOGY : TO REMOVES ALL DISSOLVED INORGANIC & ORGANIC IMPURITIES

The membranes used have spiral configuration i.e. osmotic membranes are wrapped in a coil around central manifold.

b) Membrane Housing Vessel

The membrane is housed in ABS suitable for one element of standard size.

Permeate Rota meter

Allows the user to check the flow rate of RO permeate water.

Booster Pump

The pump is used where there is a mains pressure of 0.5 bars or less.

Ultra Filtration.

Ultra filtration is separation process using membrane with pore size in the range between 0.1 to 0.012 micron. Typically ultra filtration will remove high molecular substance colloidal materials and organic and inorganic polymeric molecules.

U.V. System

UV system for very low bacteria levels. Type 2 RO water system can be equipped with a UV system .water is sanitized through a 254 nm UV lamp in a stainless steel housing. UV lamps kill any live bacteria & microorganisms.

Mix Bed Resin

The resin filters are a very high quality Semiconductor grade mixed bed resins that remove the last of the Ions from the RO water. The mixed bed resin removes the dissolved ions of various minerals from the water to bring the water resistively up to 0.1 ?. This is what gives the final polish to the water.