3 Core Heat Shrinkable 22 kV Outdoor / Indoor Termination Kit

Product Details

Indoor terminations for screened, paper insulated cables (MIND) with one metal sheath per phase 10 kV, 20 kV and 35 kV Cable The indoor termination is designed for 10 kV, 20 kV and 35 kV screened three and single core paper insulated cables (MIND) with one metal sheath per phase. For example: ????????????, HAKnFtA, HAKNY, HknFty, AMKTQYPVsp., AMKTOYPVsp., AOSB, NPZO 13, NPZOP 13, NPZO 23. Design of termination Yellow, oil resistant void filling tape is laid around the end of the metal sheath and the paper cores are completely covered with oil barrier tubing. An oil resistant sealing boot ensures a pressure tight seal to the cable lug. Short conductive tubing rebuilds the screen from the metal sheath to the covered paper core. Yellow stress grading mastic is laid around the end of the conductive tubing and a stress control tubing is shrunk over the conductive tubing and the covered paper insulation. The end of the cores and the stress control tubing are insulated with non-tracking insulating tubing. Additional skirts are installed onto the tubing (see table). Solderless earth connections can be ordered separately. Dimensions L, D see table Nominal voltage Cross section Ordering description Dimensions (mm) No. of Uo/U (kV) (mm2) L D skirts 6/10 35– 70 EPKT-24B1MI-CEE01 330 85 3 x 1 95–240 EPKT-24C1MI-CEE01 330 95 3 x 1 35– 50 EPKT-24B1MI-CEE01 330 85 3 x 1 12/20 70–185 EPKT-24C1MI-CEE01 330 95 3 x 1 240–300 EPKT-24D1MI-CEE01 330 115 3 x 1 50– 95 EPKT-36C1MI-CEE01 430 95 3 x 2 20/35 120–185 EPKT-36D1MI-CEE01 430 115 3 x 2 240–500 EPKT-36E1MI-CEE01 430 115 3 x 2 Note: One termination kit includes material for 3 phases. Longitudinally sealed cable lugs are not part of the kit and can be ordered separately. Solderless earth connection Cross section Ordering description (mm2) three core cables single core cable single core cable including breakout with lead sheath with AL sheath 35–150 EAKT-1678 EAKT-1668-DE01* 70–150 EAKT-1678 EAKT-1668-DE01* SMOE-61832* 150–240 EAKT-1679 EAKT-1669-DE01* SMOE-61832* * 3 Earth connection kits have to be ordered per termination kit. Note: The solderless earth connection kit must be ordered separately. The EAKT kit includes roll springs, earth leads, protection tubing and for three-core cables also heat-shrinkable breakout. The SMOE kit includes a Ligarex connection system (see also the chapter "Tools and Accessories"). Explanation of MI and MIND: MI = Mass Impregnated = cable impregnated with draining compound MIND = Mass Impregnated Non Draining = cable impregnated with non draining compound D LCable The indoor termination is designed for 10 kV, 20 kV and 35 kV screened three and single core paper insulated cables (MIND) with one metal sheath per phase. For example: ????????????, HAKnFtA, HAKNY, HknFty, AMKTQYPVsp., AMKTOYPVsp., AOSB, NPZO 13, NPZOP 13, NPZO 23. Design of termination Yellow, oil resistant void filling tape is laid around the end of the metal sheath and the paper cores are completely covered with oil barrier tubing. An oil resistant sealing boot ensures a pressure tight seal to the cable lug. Short conductive tubing rebuilds the screen from the metal sheath to the covered paper core. Yellow stress grading mastic is laid around the end of the conductive tubing and a stress control tubing is shrunk over the conductive tubing and the covered paper insulation. The end of the cores and the stress control tubing are insulated with non-tracking insulating tubing. Additional skirts are installed onto the tubing (see table). Solderless earth connections can be ordered separately. Dimensions L, D see table Nominal voltage Cross section Ordering description Dimensions (mm) No. of Uo/U (kV) (mm2) L D skirts 6