4000 Litres Ro Plant

Product Details

ASSUMPTIONS:

    No. of working days:360 days

    No. of working hours:10 hours

    Capacity utilization:95-98%

    INPUTS (Wastewater Quality): Total Dissolved Solids: 1000 PPM

    OUTPUT (Treated Water Quality): Total Dissolved Solids: 30-50 PPM

TECHNICAL SPECIFICATIONS

    Flow Rate: 10000

    Feed Water:10000 LPH

    Treated Water:4000 LPH

    Reject Water:4000 LPH

    RAW WATER PUMP:

    Purpose: To feed the Dual Media Filter at pressure more than 2.0 bar, this is min.

Operating pressure for filter.

Specifications:

    MOC: CI

    Type: Horizontal Centrifugal

    Flow Rate: 5000liters per hour

    Electrical: 440 V, Three phases, 50 Hz

    Cycle: 2900 rpm

    Make: CRI / CROMPTON/kirloskar

    Quantity: 1 No.

    SAND MEDIA FILTER:

    Purpose: To remove the total suspended solids, dirt, iron and reduce salt density index which can foul membranes

 Specifications:

Vessel:

Make: Superflow

Material of construction: FRP

Size: 24 x 72

Testing pressure: 10 Kg/cm2

Opening: Top & Bottom

Quantity: 1 No.

Valve:

Make: UKL

Material of construction: Noryl

Type: Multiport Single lever

Size: 1.5 inches

Maximum Flow Rate:10,000LPH

Working Pressure:2-4 Bar

Working: Down-Flow

Media:

Mixed bed sand media consisting of the following

Average porosity 50 micron particulate size

Pipelines & Accessories:

Pipe of PVC 10 Bar tested pressure

ACTIVTED CARBON FILTER:

Purpose: to get rid of the full color, smell, odor from the water.

Specifications:

Vessel:

Make: Superflow

Material of construction: FRP Plastic

Size: 24X72

Testing Pressure: 10 Kg/cm2

Opening: Top & Bottom

Quantity: 1 No.

Valve:

Make : UKL

Material of construction : Noryl

Type : Multiport single lever value

Size : 1.5 inches

Maximum Flow Rate : 10000LPH

Working Pressure : 2-4 Bar

Working : Down-Flow

Media:

Mixed bed sand media consisting of the following

i) Gravel ii) pebbles iii) carbon

Average porousness fifty metric linear unit particulate size Bed depth: 600mm

Pipelines & Accessories:

Pipe of PVC 10 Bar tested pressure

Testing cock & pressure gauges at inlet-outlet of system

DOSING SYSTEM:

Purpose: To dose antiscalant chemical to safeguard the scaling formation on artificial language membranes.

Specifications:

MOC: PP

Capacity: 5 LPH

Pressure: 7 Bar

Qty: 2 No.

Make: E- Dose

MICRON FILTER

Purpose: to get rid of the fine particles up to 05 microns and scale back silt density index levels to acceptable level.

Specifications: Cartridge Filter & Housing

Housing:

Make: Superflow

MOC of Housing: PP

Length: 20’’

Diameter: 4.5’’

Quantity: 2 no.

Cartridge:

Make: Krona

Cartridge MOC: Polypropylene

Length: 20’’

Diameter: 4.5’’

Quantity: 2 no.

Micron rating: 05 micron

HIGH PRESSURE PUMP:

Purpose: To feed the Reverse diffusion Membrane at pressure over the pressure taking into thought flux rate, flow and recovery

Specifications:

MOC: Stainless Steel

Type: Vertical Multistage

Flow Rate: 4000 liters per hour

Head: 140 m

Power Required: 3 Kw

Electrical: 440v, Three phase, 50 hz

Cycle: 2900 rpm

Make: CRI / SHAKTI

Quantity: 1 No.

RO MEMBRANE HOUSING:

Purpose: To pack membrane and operate at high pressure.

Material of Construction: FRP

Dia: 8”

Length: 120”

Number of Housing: 1

Dia: 8”

Length :80”

Number of Housing:1

RO MEMBRANE

Purpose: To remove the major part of TDS into 98% by Reverse Osmosis Membranes arranged and designed to give adequate flow and recovery.

Specifications:

Type: Spiral Wounded

Diameter of Membrane: 8”

Length of Membranes: 1 Mt.

No. of Membranes: 5

Recovery per Membrane: 10-15%

Salt Rejection per Membrane: 98-99%

Make of Membranes: CSM/ CPA / ESPA/ DOW

System Recovery: 55-60

RO CLEANSING SYSTEM:

Purpose: We provide a flushing system, which shall help to clean the membrane and get rid of the floulants that get deposited on the membranes.

Specifications:

Flushing Time: 15 minutes

Flushing Media: Treated Water/ Chemical

Flushing Tank Size : 300 L

Tank MOC: HDPE

Flushing pump: SS PUMP –CRI / GRUNDFOS

Semi automatic with two ball valves operation

ELECTRICAL PANEL:

Purpose: an impression panel is provided as a security live for the pumps electrical things.

Specifications:

Complete Starters, overload relays,

Voltmeter, Ammeter, MCB’s, indicating lights

Rocker switches for Dosers

Incommers, Auto-Manual switches

INSTRUMENTATION:

Purpose:

Flow Meter: To measure the online flow of water Superflow

TDS Meter: to live the net TDS of water

Low pressure switch: to safeguard artificial language pump from dry running

High pressure switch: to safeguard artificial language pump from back pressure

Pressure Gauges: For calculate pressure for each unit

Specifications:

Rota Meter:

Quantity: 2 Nos.(permeate & reject line)

Range: 4.0 cu.m. per hour

Make: Superflow

Pressure Switch :

Range: 0-450psi

Quantity: 2 No.(Low & High)

Make: Superflow

Pressure Gauges:

Quantity: 4 No.

Range: 0-7 bar

Dial Size: 4 inches

Type: Bourdon

Make: Superflow