480tb Nexans Euromold Plug In Tee Connector

Product Details

Dead Break Elbow Connector Euromold 480TB Plug-In Separable Tee Connector MV HV Nexans Euromold 480TB elbow connectors (bolted tees) are used to terminate MV-HV XLPE/EPR (polymeric) insulated cables up to 42kV into Interface C Bushings according to CENELEC EN50180 and EN50181. 1250A Connector Continuous Current Rating 42kV Connector Maximum Voltage Rating Euromold 480TB is a screened separable tee connector (bolted type) specified to terminate and connect medium/high voltage cables in the following voltage classes: 6/10 (12) kV 6.35/11 (12) kV 8.7/15 (17.5) kV 12/20 (24) kV 12.7/22 (24) kV 18/30 (36) kV 19/33 (36) kV 20.8/36 (42) kV To select the correct Euromold 480TB connector for termination of MV HV power cables with copper wire screen or tape screen to Interface C bushings (1250 Amp) full cable specification with dimensional information is required – see the Euromold 480TB download opposite for complete technical specification of the elbow connector. Euromold connectors should be installed only by competent jointers trained in good safety practices involving high voltage electrical equipment. Euromold 480TB The Euromold 480TB tee connector with 630A – 1250A current rating is designed for Interface C and covers voltages from 12kV to 42kV with a maximum conductor size of 300sqmm. Euromold 480TB plug-in tee connectors can be supplied as a straight connector (450SR) or a coupling connector (800PB, 804PB or 809PB) and with surge arresters (800SA or 300SA) – all suitable for use with Interface C Compact type bushings on SF6 gas-insulated switchgear. Euromold 480TB separable tee connectors are designed to connect all polymeric screened cables to suit CENELEC Interface Type C (630-1250amp) equipment bushings up to 42kV. Designed to connect polymeric insulated cables with a copper wire screen but can be used on wire armoured, copper tape screen cables with the use of additional screen earth kits and accessories. Euromold Kit MT is required for use with copper tape screened cables, typically BS6622 cable – this comprises 3 lengths of tinned copper earth braid and constant force springs, the earth braid includes a soldered end with stud hole for the earthing connection to the HSGK cable gland or grounding point. 480TB connectors are suitable for terminating MV-HV cables with either "easy-peel" or bonded semicon screens – the 400 Series bolted tee connectors are specified for indoor cable termination applications, apply suffix (MWS) for outdoor cable connections where additional water-sealing and blocking mastic is required. Connector accessories include: dead-end receptacle, dead-end plug, stand-off plug and earthing plug for type C Compact interfaces. Manufacturer – Nexans Euromold MV HV Equipment Bushing Connector – Interface C Compact Maximum Operating Current – 630A or 1250A (Amps) Voltage Classes – 12kV 24kV 33kV 36kV 42kV Maximum Terminate & Connect Cables – Polymeric XLPE EPR Conductor Cross Section Sizes – 35-300sqmm Core Insulation Diameter Range – 12.0-40.5mm Applications – MV HV Switchgear, Transformers, Motors Dead-Break or Load-Break – Dead Break Connectors ➡ See complete range of Nexans Euromold Connectors