50 Hz Bennewart Flex Tester I9 (Digital), 220 V

Product Details

OVERVIEW Bennewart Flex Tester allows determining the resistance of a sole to the growth of a cut during repeated flexing. It is designed for the assessment of complete bottom constructions (including midsoles and insoles).  It can also be used to assess the effect of surface patterns on crack initiation and growth. This test is especially applicable to the outsoles of footwear but may also be used with certain other flexible components.Paramount Bennewart Flex Tester i9Ô is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It consists of a drive unit comprising an electric motor with pulleys and belts and link mechanism to give an oscillating movement to one of the two grips holding the two ends of the test specimen, the other grip being fixed. The oscillating grip has gun metal bushes, which slides on two hardened and ground bearing steel rods to give it a long working life. Each grip consists of swayable bases pivoted on ball bearings so that the two ends of the test specimen are free to align themselves with the natural contour of the specimen during flexing. A six-digit pre-set electronic digital counter the numbers of test cycles and also stops the motor after pre-set numbers of test cycles. The apparatus is finished in Blue Powder Coated Paint. SALIENT FEATURE To Determine the Flexing Resistance of Shoe Outsoles, to cut growth, during repeated fl­exing, at a certain speed and angle.To Test the outsole, an incision or Holes are plunged in the outsoles, at the maximum bending position, and after specified test cycles, the incision length or the cut growth is checked to find the ­flexing resistance.Sturdy & Ergonomic Equipment for Accurate & Reliable Results.2 Samples can be tested at a timePrecision Engineered components for continuous operationsAdheres to National & International Standards  STANDARD ACCESSORIESMain Unit : 01 No.Detailed User''s Manual: 01 No.Calibration Certificate: 01 NoInspection & Conformance Certificate: 01 No.  TECHNICAL DETAILSNumber of specimen test: 2 for full sole, 6 for cut test specimenFlexing Speed: 140 Cycles per MinuteAngle of flexing: 90°Diameter of bending mandrel: 30 mmFrequency of operation: 125 to 150 cycles/minuteMotor: 1/2 HP, single- phase 230V ACCounter: Programmable 6 digits DIGITAL CounterOverall Dimensions: LENGTH x DEPTH x HEIGHT                                         1050mm x 425mm x 550mm                                               41.3" x 16.7" x 21.6" Net Weight of the Instrument: 80 kg (176 lb.)  RELATED STANDARDS : SATRA TM 161, ISO 17707, DIN 53543 etc.