Home » Sensors & Transducers » Temperature Sensor » AM2302 Humidity And Temperature Module
AM2302 Humidity And Temperature Module
₹ 550 Get Latest Price
Product Specifications
| Brand | SEES |
| Accuracy | 2-5 % |
| Brand | SEES |
| Humidity Accuracy | 2-5 % |
| Humidity Operating Range | 100 |
| Interface Type | ARDUINO |
| Maximum Operating Supply Voltage | 12V |
| Model Name/Number | AM2302 |
| Mounting Type | PCB MOUNT |
| Operating Temperature | 80 |
| Output Type | ANALOG |
| Output Voltage | 5V |
| Part Number | AM2302 |
| Resolution | 2-5 % |
| Storage Temperature Range | -40 to 80 DegreeC |
| Temperature Accuracy | -40 to 80 DegreeC |
GST No - 33EFBPS6615K1Z7 | Member since 2026
5-D, Dispensary land, Peelamedu, Coimbatore, Tamil Nadu, 641004
AM2302 Humidity And Temperature Module Read More...
Product Details
AM2302 Sensor ModuleAM2302 Temperature and Humidity Sensor Module (wired DHT22 Sensor)The AM2302 is a wired version of the DHT22, in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. AM2302 output is a calibrated digital signal. It applys exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements is connected with 8-bit single-chip computer.Every sensor of this model is temperature compensated and calibrated in accurate calibration chamber and the calibration-coefficient is saved in type of program in OTP memory, when the sensor is detecting, it will cite coefficient from memory. Small size & low consumption & long transmission distance (100m) enable AM2302 Temperature and Humidity Sensor Module to be suited in all kinds of harsh application occasions. Single-row packaged with four pins, making the connection very convenient.There is a 5.1K resistor inside the sensor connecting VCC and DATA so you do not need any additional pullup resistors.Specifications of AM2302 Module
- Low cost
- 3 to 5 Volt power and I/O
- 2.5mA max current use during conversion (while requesting data)
- Good for 0-100% humidity readings with 2-5% accuracy
- Good for -40 to 80°C temperature readings ±0.5°C accuracy
- No more than 0.5 Hz sampling rate (once every 2 seconds)
- Body size 27mm x 59mm x 13.5mm (1.05" x 2.32" x 0.53")
- 3 wires 23cm long (9")
- 27mm wide x 58.75mm tall x 13.30mm deep
Additional Information:
- Item Code: SEES-3092
- Production Capacity: 1000 NOS
- Delivery Time: 1-2 DAYS
- Packaging Details: CARTON BOXES
5-D, Dispensary land, Peelamedu, Coimbatore, Tamil Nadu, 641004
Send your enquiry to supplier
Related Products
Thermocouple Temperature Sensor
₹ 300
| Country of Origin : Made in India |
RADIANT CONTROLS AND AUTOMATION PRIVATE LIMITED, Gandhinagar, Gujarat
Class B Rtd With Transmitter, Temperature Range: -200 to 600 deg C
₹ 2,500
| Accuracy : Class B |
| Application : Industrial |
| Availability : In Stock |
| Brand : Adarsh |
PVC Ingersoll Rand replacement Temperature Sensor, For Industrial, 220 V
₹ 5,000
| Brand : Air Power Services |
| Material : PVC |
| Power : 12 W |
| Temperature : 0 Deg C to 250 Deg C |
₹ 15,000
| Accuracy : Level B |
| Brand : Daikin |
| Max Temperature : 250C |
| Part Number : 18E-3-100-1/4-6 |
PT100 Temperature Sensor (3mm Sheath, 0-250 C Range)
₹ 1,200
| Application : Fluid Temperature Measurement |
| Brand : Tempsens |
| Cable length : 5 m |
| Element type : PT100 |
Housing Connector, For Industrial, Brass
₹ 125
| Availability : In Stock |
| Build Material : Brass |
| Country of Origin : Made in India |
| Usage/Application : Industrial |
SIPL Plastic Photocell Sensor For Boom Barrier, For Parking
₹ 2,500
| Availability : In Stock |
| Brand : SIPL |
| Color : Black |
| Frequency : 1.92KHz |
₹ 35,000
| Application : Industrial |
| Brand : Quick CNC Technologies |
| Color : Black |
| Country of Origin : Made in India |
Customer Reviews
Submit your Reviews
Best Selling Products from Sri Electronics and embedded Solutions
48v 800watts BLDC- E Bike Conversion Kit+Speedometer+Lithium Phosphate Battery+Charger-Full Set
₹ 3,799
| Application : 48V 800Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set, LED Lighting |
| Dimension : 48V 800Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Electrical Parameters : 48V 800Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Flash Format : 48V 800Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
48v/60v 1500w Hybrid Conversion Kit For Activa Retrofit Type Petrol& Electric
₹ 2,049
| Brand : 48v/60v 1500w Hybrid Conversion kit for Activa RETROFIT TYPE PETROL& ELECTRIC |
| Connectivity : 48v/60v 1500w Hybrid Conversion kit for Activa RETROFIT TYPE PETROL& ELECTRIC |
| Control Mode : 48v/60v 1500w Hybrid Conversion kit for Activa RETROFIT TYPE PETROL& ELECTRIC |
| Country of Origin : Made in India |
Black 0.25 Kg DIY Robot ARM Kit 6 DOF Without Servo Motor RC, For Industrial
₹ 2,800
| Color : Black |
| Frequency : High |
| Material : Stainless Steel |
| Motors : Servo |
48v/60v/72v 1500w Hybrid Conversion Kit for Activa-RETROFIT (HYBRID)+Lithium battery+Lithium charger
₹ 5,935
| Body Material : 48v/60v/72v 1500w Hybrid Conversion kit for Activa-RETROFIT (HYBRID)+Lithium battery+Lithium charger |
| Fuel Tank : 48v/60v/72v 1500w Hybrid Conversion kit for Activa-RETROFIT (HYBRID)+Lithium battery+Lithium charger |
| Input Frequency : 48v/60v/72v 1500w Hybrid Conversion kit for Activa-RETROFIT (HYBRID)+Lithium battery+Lithium charger |
| Input Voltage : 48v/60v/72v 1500w Hybrid Conversion kit for Activa-RETROFIT (HYBRID)+Lithium battery+Lithium charger |
60/72V 2000W PMSM DATAI MCD KIT WITH 42 INCH DIFFERENTIAL AXLE- ORIGINAL DATAI
₹ 4,900
| Torque : 60/72V 2000W PMSM DATAI MCD KIT WITH 42 INCH DIFFERENTIAL AXLE- ORIGINAL DATAI |
| Usage/Application : 60/72V 2000W PMSM DATAI MCD KIT WITH 42 INCH DIFFERENTIAL AXLE- ORIGINAL DATAI |
| Vehicle Model : 60/72V 2000W PMSM DATAI MCD KIT WITH 42 INCH DIFFERENTIAL AXLE- ORIGINAL DATAI |
| Volt watt Bike Hub Motor Conversion Kit with Disc Brake- Inch - For Scotter : 60/72V 2000W PMSM DATAI MCD KIT WITH 42 INCH DIFFERENTIAL AXLE- ORIGINAL DATAI |
48/60v 1000w 17 Inch Hub Motor-E-Bike Kit +Speedometer+Lithium Phosphate Battery+Charger-Full Set
₹ 4,549
| Brand : 48/60v 1000w 17,18 inch Hub motor-E-bike kit +speedometer+Lithium phosphate battery+charger-Full set |
| Control Mode : 48/60v 1000w 17,18 inch Hub motor-E-bike kit +speedometer+Lithium phosphate battery+charger-Full set |
| Current : 48/60v 1000w 17,18 inch Hub motor-E-bike kit +speedometer+Lithium phosphate battery+charger-Full set |
| Efficiency : 48/60v 1000w 17,18 inch Hub motor-E-bike kit +speedometer+Lithium phosphate battery+charger-Full set |
Paddle E-Rickhsaw kit- 48v 800w BLDC Motor kit
₹ 6,999
| CONNECTOR- : 5 TERMINAL |
| Country of Origin : Made in India |
| Motor Power : 800 W |
| Motor RPM : 500 rpm |
Raspberry Pi 4 Model B with 2GB Ram Starter Kit
₹ 7,500
| Memory : 4GB |
| Model No./Name : Raspberry Pi Zero |
| SD card support : Yes |
| Surface Finishing : Polished |
48V 800Watts BLDC- E Bike Conversion Kit - For Super Excel, Spelendor,Passion Pro
₹ 5,799
| Maximum Brightness : 48V 800W-Khetaan Brand-BLDC Motor For E Bike kit |
| Screen Lifetime : 48V 800W-Khetaan Brand-BLDC Motor For E Bike kit |
| Screen Weight : 48V 800W-Khetaan Brand-BLDC Motor For E Bike kit |
| Viewing Angle : 48V 800W-Khetaan Brand-BLDC Motor For E Bike kit |
48/60v 1000watts BLDC- E Bike Conversion Kit+Speedometer+Lithium Phosphate Battery+Charger-Full Set
₹ 4,614
| Model : 48/60V 1000Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Power : 48/60V 1000Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Screen Dimensions : 48/60V 1000Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Shape : 48/60V 1000Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
