BOPP two sides lower heat seal temperature tobacco cigarette packs/boxes wrapping film clear transparent

Product Details

BOPP two sides lower heat seal temperature tobacco cigarette packs/boxes wrapping film clear transparent

Polypropylene in reels 132mm:

1- Description and using : polypropylene in bobbins which are used for wrapping cigarette soft packs on:

A) SASIB machines model CP1 which is amended to work on polypropylene instead of cellophane speed 150-200 pack/min

B) SASIB machines model CP1: speed 300 pack/min

C) GD Machines model C600

2- width: 132 mm+/-0.5mm

3- length: 3000m

4- internal bobbin diameter: 120mm+/-0.5mm

5- Grammage: 17-20g/m2

6- thickness: 19-22micron

7- glossing: 60% min

8- milting point: 160-166C

9- tension strength: 2 kg/15mm minimum

BOPP FILM POLYPROPYLENE SEALABLE BY BOTH SIDES.

DESCRIPTION

The film presents thermal sealability on both sides. This film contains an immigration package slip and antistatic additive that provides excellent machinability in all kinds of automatic packing.

The untreated side offers a wide range of sealing. The surface treatment is on the outside of the coil.

APPLICATIONS

Designed to be used in a variety of conversion processes and packaging of all types of industrial and food products in casings or laminations.

Meets FDA regulations for direct food contact. Its properties allow it to be used sealants in numerous applications with sealed end flap or overlap in vertical or horizontal automatic packing.

Standard Dimensions

Thickness (µm) Weight (g/m2) Width (mm)

Treated side: 15/13.6, 20/18.1, 25/22.6

External: 30/27.2, 35/31.7, 40/36.2, 50/45.3

MAIN CHARACTERISTICS

Flexibility of use

Excellent antistatic properties

Magnific flatness and dimensional stability

One side treated for applying dyes or additives

Outer surface treated to application of ink or additives

A wide sealing range

TYPICAL VALUES AND PHYSICAL PROPERTIES

Opacity % ASTM D1003: 1.5 / 1.8 / 2.2

Bright @45º % ASTM D2457: 80

Coefficient of Friction TO/TO ASTM D1894: 0.20; T/T: 0.35 / 0.25

Tensile Strength N/mm2 ASTM D882: MD 125, TD 235

Elongation at Break %: TD 180, MD 50

Drying Module @2% N/mm2: MD 1,700, TD 3,000

Corona Treatment dinas/cm ASTM 2578: 38

Sealing Temperature ºC ASTM F88: TN 105, T 125

Sealing Strength N/25mm: TN 4.0 / 5.0, T 3.5 / 5.5

Water Vapor Transmission g/m2/dia ASTM F1249 @38ºC,90%HR: 8.5 / 6.5 / 5.6 / 4.7 / 4.3 / 3.8

Oxygen Transmission g/m2/dia ASTM D3985 @22ºC,0%HR: 2,900 / 2,200 / 1,800 / 1,600 / 1,400 / 1,200

NOTE: MD Machine Direction, DT Transverse Direction, OT Face No Treatment, T Treatment.

The data in this datasheet should be used as guide values and not as specification limits.