Devcon Titanium Putty

Devcon Titanium Putty

Product Description:
Devcon Titanium Putty is a high performance, titanium reinforced epoxy engineered for making critical repairs to machinery and precision parts
Features and Benefits:
Temperature resistance to 176 Degrees Centigrade
Excellent chemical resistance
Compression strength of 124 MPa
Qualifies under mil spec DOD-C-24176B
Non-rusting, machinable to metallic finish
Restore bearing housings and scored shafts
Rebuild wear rings, hydraulic rams and valves
Repair equipment and parts that require a machined finish

Typical Physical Properties Cured 7 days @ 24
% Solids by Volume: 100
Cured Shrinkage ASTM D2566: 0.0010 cm/cm
Pot life at 24oC (0.5kg mass): 21 minutes
Compressive Strength ASTM D695: 129.8 MPa
Adhesive Tensile Shear ASTM D1002: 13.8 MPa
Cured Hardness Shore D ASTM D2240: 87D
Dielectric Strength, volts/mm ASTM D149: 2205

Temperature Resistance:
Wet 66 Degrees Centigrade/ Dry 177 degrees centigrade
5% Bleach (Sodium Hypochlorite) - E, 10% Phosphoric Acid VG
5% Trisodium Phosphate - E, 10% Sulphuric Acid F
10% Sulphuric Acid - E, 10% Sodium Hydroxide E
50% Sulphuric Acid � E, 50% Sodium Hydroxide E
10% Hydrochloric Acid � E, 5% Alum (Aluminium Sulphate) E
0% Nitric Acid � U, 10% Acetic Acid - U
KEY: E = Excellent, VG=Very Good, F-Fair, Unsatisfactory

_{Devcon Titanium Putty are very good in water, saturated salt solution, leaded gasoline, mineral spirits, ASTM #3 Oil and propylene glycol. Epoxies are generally not recommended for long term exposure to concentrated acids and organic solvents}

Surface Preparation for Devcon Titanium Putty: Proper surface preparation is essential to a successful application.