Home » VFD, PLC, HMI & Control Equipments » Stepper Motor Drives » DM 1182 Stepper Drives, Single Phase
DM 1182 Stepper Drives, Single Phase
₹ 7,400 Get Latest Price
Product Specifications
| Input Phase | Single Phase |
| Availability | In Stock |
| DIR+ | DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; in double-pulse mode (software configurable), this signal is counter-clock (CC |
| ENA+ | Enable signal: This signal is used for enabling/disabling the driver. High level (NPN control signal, PNP and Differential control signals are on the contrary, namely Low level for enabling.) for enab |
| FAULT+ | Fault Signal: Open collector fault output. High impedance between FAULT+ and FAULT- during normal operation and low impedance when over-voltage, under-voltage, over-current and phase error protection. |
| Isolation resistance | 500 Mohm |
| Logic signal current | 7 -20 mA |
| Motor Type | Induction |
| Output current | 0.5-8.2 (5.9 RMS) A |
| Parameters | DM1182 |
| Pin Functions | Details |
| PUL+ | Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each rising or falling edge active (software configurable); 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double |
| Pulse input frequency | 0-200 kHz |
| Supply voltage | 80(113)-110(155) (Typical)-150(212) VAC(VDC) |
GST No - 24AAFFI6374J1Z5 | Member since 2023
GROUND FLOOR, B-143, KAMAL PARK SOCIETY PART-2, NEAR LITTLE FLOWER SCHOOL, KAPODARA, Surat, Gujarat, 395006
DM 1182 Stepper Drives, Single Phase Read More...
Product Details
The DM1182 is a high voltage, versatility fully digital stepping drive based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor auto-test and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers on the markets. Its unique features make the DM1182 an ideal solution for applications that require low-speed smoothness.Features:Extra-low motor noise offers excellent quietness Anti-Resonance, provides optimum torque and nulls mid-range instability Self-test and Auto-configuration technology, offers optimum responses with different motors Microstep resolutions programmable, from full-step to 102,400 steps/rev Supply voltage up to 150 VAC Output current programmable, from 0.5A to 8.2A Pulse input frequency up to 200 KHz Automatic idle-current reduction Supports PUL/DIR and CW/CCW modesSpecifications:Pin Functions Details PUL+ Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each rising or falling edge active (software configurable); 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double pulse mode (pulse/pulse) , this input represents clockwise (CW) pulse???active both at high level and low level (software configurable). For reliable response, pulse width should be longer than 2.5μs. Series connect resistors for current-limiting when +12V or +24V used. The same as DIR and ENA signals.PUL- DIR+ DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; in double-pulse mode (software configurable), this signal is counter-clock (CCW) pulse???active both at high level and low level (software configurable). For reliable motion response, DIR signal should be ahead of PUL signal by 5μs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. Please note that rotation direction is also related to motor-driver wiring match. Exchanging the connection of two wires for a coil to the driver will reverse motion direction.DIR- ENA+ Enable signal: This signal is used for enabling/disabling the driver. High level (NPN control signal, PNP and Differential control signals are on the contrary, namely Low level for enabling.) for enabling the driver and low level for disabling the driver. Usually left UNCONNECTED (ENABLED). When use it, the ENA signal should ahead the PUL signal at least 100ms due to of soft-start feature of the DM1182.ENA- FAULT+ Fault Signal: Open collector fault output. High impedance between FAULT+ and FAULT- during normal operation and low impedance when over-voltage, under-voltage, over-current and phase error protection. MAX: 30VDC, 20mA.FAULT-
Company Details
| GST Number | 24AAFFI6374J1Z5 |
| Year of Establishment | 2016 |
| Nature of Business | auto mation solution |
| Number of Employees | 1 - 50 |
| Turnover | 2000000 |
| Legal Status | Partnership |
Company video
Industrial Trading Center operates from Surat in Gujarat and holds a solid reputation for supplying industrial and electromechanical equipment and services. The company specializes in supplying and manufacturing high-performance equipment including DC Motors, Hybrid Stepper Motors, Servo Drives, Foot Massage Machines, and Tapping Machines. Industrial Trading Center emphasizes quality, durability and technical precision. The company supplies products to automation, manufacturing, engineering and wellness sectors.
read more...
GROUND FLOOR, B-143, KAMAL PARK SOCIETY PART-2, NEAR LITTLE FLOWER SCHOOL, KAPODARA, Surat, Gujarat, 395006
Send your enquiry to supplier
Related Products
Star Performer
Yako 2608 Stepper Drivers, 1-axis
₹ 4,500
| Availability : In Stock |
| Brand : Yako |
| Input Phase : Single Phase |
| Input Voltage : 18-80VAC |
PCDC-05 PMDC Motor Drive Nichrome (PRICISE CONTROLS)
₹ 5,850
| Brand : PMDC |
| Input Phase : Single Phase |
| Input Voltage : 230V |
| Model Name/Number : PMDC |
Magicpack Automations Private Limited, Medchal Malkajgiri, Telangana
Cnc Router Spare Drive And Motor
₹ 5,000
| Business Type : Manufacturer, Supplier |
| Condition : Brand New |
| I Deal In : New Only |
| model : Cnc Router Spare Drive And Motor |
₹ 20,000
| Availability : In Stock |
| Brand : Leadshine |
| Input Type : AC Single Phase |
| model : M542 |
Kp tech ZY-B3 Hybrid Stepper Driver, Single Phase, 220V
₹ 15,000
| Brand : Kp tech |
| Country of Origin : Made in India |
| Input Phase : Single Phase |
| Input Voltage : 220V |
₹ 15,000
| Frequency : 50Hz |
| Input Phase : Single Phase |
| Input Voltage : 220V |
| model : Stepper Motor Drives |
₹ 16,600
| model : Dek Dual Stepper 155510 |
₹ 15,000
| Body Material : Aluminum |
| Brand : AVM |
| Color : Silver |
| Input Phase : Single |
12-230 Vdc 0.5-8.2 Amp Stepper Drive
₹ 1,000
| Availability : In Stock |
| Brand : LEADSHINE/YAKO |
| Input Phase : ALL TYPE |
| Input Voltage : 12-230 VDC |
Customer Reviews
Submit your Reviews
Best Selling Products from Industrial Trading center
Kansa Thali Foot Massage Machine
₹ 19,500
| Color : Grey |
| Material : Metal |
| Modal : Kansa Thali Foot Massage Machine |
| Operation Mode : Electric |
₹
28,000
30,000
| Material : METEL |
| Modal : 007 |
| Usage/Application : FOOT MASSAGE |
₹ 3,000
| Material : Mild Steel |
| model : AC Gear Motor |
| Power : 15 W |
| Usage/Application : Industrial |
₹ 2,00,000
| End Type : Square End |
| Grade : CARBAN |
| Material : HSS |
| Maximum Cutting Depth : 20 MM |
₹ 1,200
| Casing Material : PLASTIC |
| Current : 1A |
| Model : Digital Speed Controllers |
| Mounting Type : Screw Mount |
₹ 1,100
| Frequency : 60 Hz |
| Input Phase : Single Phase |
| model : Servo Motor & Stepper Drive |
| Usage/Application : Industrial |
₹ 6,000
| Frequency : 60 DB |
| Gear Type : Planetary |
| Material : Cast Iron |
| model : Planetary Gearbox |
₹ 2,500
| Application : Construction Equipment |
| Color : Silver |
| Model : Helical Gear Box |
| Type : Timing Belt |
₹ 225
| Color : SILVER |
| Material : Bearing Steel |
| Model : Ball Screw Nut Housing |
| Packaging Type : BOX PACKING |
Ball Screw Support Unit - Bk/bf
₹ 2,672
| Color : Black |
| Material : Metal |
| Model : Ball Screw Support Unit - Bk/bf |
| Packaging Type : Box |
