Home » VFD, PLC, HMI & Control Equipments » Stepper Motor Drives » DRV8825 Stepper Motor Driver Module
DRV8825 Stepper Motor Driver Module
₹ 1,350 Get Latest Price
Product Specifications
| Brand | DRV8825 Stepper Motor Driver Module |
| Input Voltage | DRV8825 Stepper Motor Driver Module |
| Input Phase | DC |
| Brand | DRV8825 Stepper Motor Driver Module |
| Control Method | SVPWM |
| Model Name/Number | DRV8825 Stepper Motor Driver Module |
| Motor Type | Synchronous |
| Output Current | DRV8825 Stepper Motor Driver Module |
| Output Power | DRV8825 Stepper Motor Driver Module |
| Voltage | 12V |
GST No - 33EFBPS6615K1Z7 | Member since 2026
5-D, Dispensary land, Peelamedu, Coimbatore, Tamil Nadu, 641004
DRV8825 Stepper Motor Driver Module Read More...
Product Details
Want to controller stepper Motor from Arduino, Raspberry Pi or any other Micro-controller? Well then this stepper motor driver will simplify your coding and will give you more flexibility in controlling the stepper motor.
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver. The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil.
Features of DRV8825 Module:-
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
Specifications of DRV8825 Module:-
- Minimum operating voltage: 8.2V
- Maximum operating voltage: 45V
- Continuous current per phase: 1.5 Amp
- Maximum current per phase: 2.2 Amp
- Minimum logic voltage: 2.5V
- Maximum logic voltage: 5.25V
- Microstep resolutions: Full, 1/2, 1/4, 1/8, 1/16 and 1/32
- Reverse voltage protection?: No
* Product Images are shown for illustrative purposes only and may differ from actual product.
Additional Information:
- Item Code: SEES7
- Production Capacity: 1000 NOS
- Delivery Time: 2-3 DAYS
- Packaging Details: CARTOON BOXES
5-D, Dispensary land, Peelamedu, Coimbatore, Tamil Nadu, 641004
Send your enquiry to supplier
Related Products
Star Performer
Yako 2608 Stepper Drivers, 1-axis
₹ 4,500
| Availability : In Stock |
| Brand : Yako |
| Input Phase : Single Phase |
| Input Voltage : 18-80VAC |
Cnc Router Spare Drive And Motor
₹ 5,000
| Business Type : Manufacturer, Supplier |
| Condition : Brand New |
| I Deal In : New Only |
| model : Cnc Router Spare Drive And Motor |
BBN B1206 Stepper Motor Drive, Single Phase
₹ 4,500
| Brand : BBN |
| Input Phase : Single Phase |
| Input Voltage : 220v |
| Model Name/Number : 1206 |
Stepper Motor, Step Angle: 0.9 Degree
₹ 3,500
| Availability : In Stock |
| Color : Black |
| Function : Micro step |
| Number of Phase : 2 |
Leadshine Single Phase Stepper Motor and Drive
₹ 11,000
| Brand : Leadshine |
| Drive Model Number : DM 556 |
| Driver Humidity : 40%RH - 90%RH |
| Driver Output Current : 0.5 - 5.6 A |
₹ 1,000
| Control Signal : 3.3-24V |
| Input Current : 0-5A |
| model : Tb6600 |
| Output Current : 0.5-4A |
Three Phase Siemens Stepper Motor Driver
₹ 7,000
| Brand : Siemens |
| Dimension : 75x50x35 mm |
| Output Current : 2-8 A |
| Phase : Three Phase |
Stepper drive 2DM860, Single Phase, 24VDC
₹ 4,200
| Brand : 2 DM 860 |
| Input Phase : Single Phase |
| Input Voltage : 24VDC |
| Model Name/Number : 2DM860 |
₹ 2,500
| Availability : In Stock |
| Brand : Yakotec |
| Frequency : 400Kpps Pulse Response Frequency |
| Input Phase : Single and Three Phase |
Customer Reviews
Submit your Reviews
Best Selling Products from Sri Electronics and embedded Solutions
48/60v 1000w 17 Inch Hub Motor-E-Bike Kit +Speedometer+Lithium Phosphate Battery+Charger-Full Set
₹ 4,549
| Brand : 48/60v 1000w 17,18 inch Hub motor-E-bike kit +speedometer+Lithium phosphate battery+charger-Full set |
| Control Mode : 48/60v 1000w 17,18 inch Hub motor-E-bike kit +speedometer+Lithium phosphate battery+charger-Full set |
| Current : 48/60v 1000w 17,18 inch Hub motor-E-bike kit +speedometer+Lithium phosphate battery+charger-Full set |
| Efficiency : 48/60v 1000w 17,18 inch Hub motor-E-bike kit +speedometer+Lithium phosphate battery+charger-Full set |
48/60v 1000watts BLDC- E Bike Conversion Kit+Speedometer+Lithium Phosphate Battery+Charger-Full Set
₹ 4,614
| Model : 48/60V 1000Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Power : 48/60V 1000Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Screen Dimensions : 48/60V 1000Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Shape : 48/60V 1000Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
48v 800watts BLDC- E Bike Conversion Kit+Speedometer+Lithium Phosphate Battery+Charger-Full Set
₹ 3,799
| Application : 48V 800Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set, LED Lighting |
| Dimension : 48V 800Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Electrical Parameters : 48V 800Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
| Flash Format : 48V 800Watts BLDC- E Bike Conversion Kit+speedometer+Lithium phosphate battery+charger-Full set |
Alter 36v/48v 350w 037 Pro Cycle Hub Motor Kit Black Keyless Start & Motor Lock Function
₹ 13,500
| Country of Origin : Made in India |
| DISPLAY : LCD DISPLAY WITH USB FUNCTION |
| LEVER : WUXING METAL BRAKE LEVERS WITH CUTOFF FUNCION |
| Max Speed : 30-35 KMS |
48v/60v 1500w Hybrid Conversion Kit For Activa Retrofit Type Petrol& Electric
₹ 2,049
| Brand : 48v/60v 1500w Hybrid Conversion kit for Activa RETROFIT TYPE PETROL& ELECTRIC |
| Connectivity : 48v/60v 1500w Hybrid Conversion kit for Activa RETROFIT TYPE PETROL& ELECTRIC |
| Control Mode : 48v/60v 1500w Hybrid Conversion kit for Activa RETROFIT TYPE PETROL& ELECTRIC |
| Country of Origin : Made in India |
E-cycle 48v 350w high speed Hub motor kit
₹ 8,999
| CONTROLLER : DC 24/36/48V with 18A |
| Country of Origin : Made in India |
| THROTTLE : Full Twist Throttle with Battery Indicator |
| Torque : 50nm Torque |
48v 750w Original Geekay BLDC Conversion Kit- Chain Drive
₹ 11,999
| Brand : 48v 750w ORIGINAL Geekay BLDC Conversion kit- Chain drive |
| Frequency : 48v 750w ORIGINAL Geekay BLDC Conversion kit- Chain drive |
| Fuel Tank : 48v 750w ORIGINAL Geekay BLDC Conversion kit- Chain drive |
| High download speed : 48v 750w ORIGINAL Geekay BLDC Conversion kit- Chain drive |
E-cycle Hub motor kit 36v 350w High Torque with Digital Led Display
₹ 9,999
| CONTROLLER : DC 24/36/48V with 18A |
| Country of Origin : Made in India |
| MOTOR : 24/36/48V 350W BLDC Hub Motor 90H Magnet |
| Speed : 30-35 Km/Hr |
48V 800Watts BLDC- E Bike Conversion Kit - For Super Excel, Spelendor,Passion Pro
₹ 5,799
| Maximum Brightness : 48V 800W-Khetaan Brand-BLDC Motor For E Bike kit |
| Screen Lifetime : 48V 800W-Khetaan Brand-BLDC Motor For E Bike kit |
| Screen Weight : 48V 800W-Khetaan Brand-BLDC Motor For E Bike kit |
| Viewing Angle : 48V 800W-Khetaan Brand-BLDC Motor For E Bike kit |
Alter 38/48v 350w (035 Pro) Cycle Hub Motor Kit Black 3 Speed Modes
₹ 9,450
| Country of Origin : Made in India |
| Max Speed : 30- 35 KMS |
| Motor Power : 350 W |
| OTHER : FRONT LIGHT WITH INBUILT HORN |
