Effluent Treatment Plant For Tool Manufacturing Unit

We Design, Manufacture, Supply, Erection and Commissioning Effluent Treatment Plant (ETP) on Turnkey basis for various types and natures of waste Waters, effluents which combines advanced physico - chemical treatment processes with tertiary polishing system for the removal of organic, inorganic, oil and grease, heavy metals & suspended solids. We analyze the effluent samples for different effluent parameters as per nature and compositions, carry out the treatability studies by using different methods checking techno-commercial Feasibility and then designed treatment schemes, processes accordingly to suit the purpose and need. The up-gradation, modification in the existing ETP system is possible to achieve desired limiting standard laid down by the Pollution Control Board (PCB).

CHHAYA INDUSTRIES is a specialist in industrial effluent treatment. We have created a pan India reputation for providing professional, technical and cost effective Effluent Treatment Plants.

The conceptual approach of the treatment includes the removal of suspended particles, dissolved organic matters and handling of sludge for disposal. Different processes involved are:

EQUALISATION:�The equalization tank's purpose is to balance the raw effluent from various processing units. The wastewater is collected in an existing mixed effluent tank and pumped to an existing aeration tank, which also functions as an equalisation tank. The floating aerator is used to homogenise the effluent before it is pumped to the neutralization tank for treatment.

pH CONTROL:�The pH value of effluent should be between 5.5 and 9.0, according to the Bureau of Indian Standards (BIS).pH neutralization is used to modify the pH of waste water.

For waste that is acidic (low pH): Bases are used to modify the pH of a solution.

In the case of alkali waste (high pH): Acids are used to modify the pH of a solution.

COAGULATION:�Coagulation is a technique that involves adding liquid aluminiumsulphate to untreated water. This causes tiny dirt particles to stick together after mixing. This collection of particles combines to generate larger, heavier particles that are easily removed through settling and filtration.

SEDIMENTATION:�Water travels slowly in this process, causing the heavy particles to settle to the bottom. Sludge is the term for the particles that gather at the bottom of a container.

FILTRATION:�Filtration is the process of passing water through a filter that removes particulates. The filters are made out of sand and gravel layers. Backwashing is required to clean these filters on a regular basis.

DISINFECTION:�Before entering the distribution system, water is disinfected. Chlorine is used to disinfect and decontaminate water.

SLUDGE DRYING:�Sedimentation collects and settles down solids, which are then transported to drying beds. when the sludge thickness reaches around 300 mm, the sludge charging should be stopped, and the bed should be segregated to allow natural evaporation to dry it off.

1. Effluent Treatment Plant
2. Common ETP(CETP)
3. Industrial ETP