Home » VFD, PLC, HMI & Control Equipments » Stepper Motor Drives » ES-D808 Easy Servo Drives

ES-D808 Easy Servo Drives

₹ 9,000 Get Latest Price

Product Specifications

Availability	In Stock
Command Input	Step/ Direction,Enable/Disable
Control Algorithm	SVPWM
Encoder Feedback	A,B9 Differential) Over Current,Over voltage,Position Following Error
Encoder Resolution	1000 Line
Matching Motors	ES-M22415,ES-M22430
Maximum Input Frequency	200 kHz
Model No	ES-D808
Operating Voltage	75 VDC
Output Peak	8A
Status Output	In Position,Fault Status
Weight	570 g

Industrial Trading center

GST No - 24AAFFI6374J1Z5 | Member since 2023

GROUND FLOOR, B-143, KAMAL PARK SOCIETY PART-2, NEAR LITTLE FLOWER SCHOOL, KAPODARA, Surat, Gujarat, 395006

Company Video Catalogue

Contact Supplier

ES-D808 Easy Servo Drives Read More...

Qty

Buy Now

Product Details

ES-D808 is one of the models in Leadshine ES-D series easy servo drives which can take 24-80 VDC input voltage and output 0.5 - 8.2 A continuous load-based current. It is capable of driving NEMA 17, 23, 24 and 34 easy servo motors (stepper motors with encoders) with the position loop closed in real time.Based on latest DSP technology and adopting Leadshine\'\'s advanced control algorithm, ES-D808 easy servo drive applies servo control on easy servo motors. When adopted with an easy servo motor, it combines features of both open loop steppers & brushless servo systems, and offers many unique advances features for excellent motion control system performance.Same as servo drives in traditional brushless servo systems, an ES-D808 easy servo drive takes encoder feedback from a driven ES-M series easy servo motor to close the position loop and eliminate the possibility of lose of movement synchronization. Therefore, loss of steps which limits adoption of stepper systems is totally eliminated in ES-D808 driven easy servo systems. Compared with constant output current in open loop stepper drive, output current from an ES-D808 servo drive to the driven motor is load based. When torque requirement is low, the output current is automatically lowered to the level of "just enough". But when the torque requirement is high, an ES-D808 easy servo drive can boost the output current quickly, up to 8.2A. This can significantly improve control system response time, offer excellent acceleration performance, and reduce motor heating by as much as 50% over open-loop stepper systems. Also, there is no torque reservation needed for an ES-D808 driven easy servo system. In an ES-D808 driven easy servo system, it always allows 100% torque implementation available from the driven easy servo motor and thus improves system high speed performance by as much as 30% over comparable open loop stepper systems. In addition, smoothness and quietness are also significantly improved in ES-D808 driven easy servo systems over steppers.Compared with traditional brushless servo systems, cost for ES-D808 driven easy servo systems is significantly lower. They also outperform comparable traditional brushless servo systems for the features of much higher low-middle speed torque, high standstill stiffness, no hunting (shaking), no overshooting, and almost zero settling time. In addition, plug-and-play setup for almost all applications makes ES-D808 driven easy servo system much simple to set up, over hard-to-configure brushless servo systems which usual involve configurations of tens of parameters.When an ES-D808 easy servo drive is implemented with a Leadshine ES-M series easy servo motor, there is No Configuration Needed for almost all applications. The output resolution from ES-D808 with the output resolution defaulted to output resolution of 2,000 pulses per resolution (equal to 10 microstep in 2-phase stepper systems). Via DIP switches, a user can also easily changes the output resolution to one of 15 output resolutions 800 to 51,200 (equal to 4-256 microstep in 2-phase stepper systems). With Leadshine configuration software, ProTuner, an advanced user can also set custom settings of resolution, current & position loop parameters, idle current percentage, etc.Features:Step and direction controlClosed position loop for no loss of movement synchronizationOperating voltage: 24-80 VDCLoad based output current of 0.5 - 8.2 AHigh torque at starting and low speedNo torque reservationHigh stiffness at standstillSignificantly reduced motor heatingSmooth motor movement and extra low motor noiseQuick response, no delay and zero settling timeNo loss of steps; no hunting; no overshootingPlug-and-play and no tuning for most applications

Company Details

GST Number	24AAFFI6374J1Z5
Year of Establishment	2016
Nature of Business	auto mation solution
Number of Employees	1 - 50
Turnover	2000000
Legal Status	Partnership

Company video

Industrial Trading Center operates from Surat in Gujarat and holds a solid reputation for supplying industrial and electromechanical equipment and services. The company specializes in supplying and manufacturing high-performance equipment including DC Motors, Hybrid Stepper Motors, Servo Drives, Foot Massage Machines, and Tapping Machines. Industrial Trading Center emphasizes quality, durability and technical precision. The company supplies products to automation, manufacturing, engineering and wellness sectors.