EUROMOLD 400LR ELBOW CONNECTOR PLUG IN TERMINATION KIT, 3 Core, 22 kV

Product Details

EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution. Euromold provides a complete range of accessories for underground cables: premoulded EPDM rubber connectors for cables and epoxy bushings for transformers and switchgear, as well as a large range of coldshrinkable terminations and joints from 12 to 42 kV. Euromold is also the manufacturer of electrical components for the high voltage accessories of the Nexans group. ISO 9001 Certificate Since 1992, Euromold's commitment to quality is demonstrated by its ISO 9001 certification. International standards All our products meet the International standards like CENELEC HD 629.1, CENELEC EN 50180, IEC 60137, IEC 60502-4… or country specifications. Official certificates, CESI, KEMA, ATEX… prove the conformity of our products. Long duration tests of existing or new products are continuously performed in our test fields. Laboratory accreditation Since June 2000, Euromold's independent ELAB laboratory obtained the BELAC accreditation no.144-TEST conform with the European standards for laboratories ISO 17025 for electrical testing of low and medium voltage cable accessories according to the international standards EN 50393, IEC 605024, IEC 61442 and HD 629.APPLICATION Separable elbow connector (plug-in type) designed to connect polymeric insulated cable to equipment (transformers, switchgear, motors...). DESIGN Separable connector comprising: 1. Conductive EPDM insert. 2. Conductive EPDM jacket. 3. Insulating EPDM layer   moulded between the insert   and the jacket. 4. Type B - 400 A interface   as described by CENELEC   EN 50180 and 50181. 5. Conductor connector. 6. Cable reducer. TECHNICAL CHARACTERISTICS • The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel. • Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory. 210 mm 4 5 6/10 (12) kV 6.35/11 (12) kV 8.7/15 (17.5) kV 12/20 (24) kV 12.7/22 (24) kV 18/30 (36) kV 19/33 (36) kV 1 2 365 mm 3 7. Earthing lead. The screen break design enables cable outer sheath testing without removing or dismantling the connector. SPECIFICATIONS AND STANDARDS The separable connector 400LR meets the requirements of CENELEC HD 629.1. Separable connector type 400LR/G K400LR/G M400LR/G Voltage Um (kV) 7ESIGN Separable connector comprising: 1. Conductive EPDM insert. 2. Conductive EPDM jacket. 3. Insulating EPDM layer   moulded between the insert   and the jacket. 4. Type B - 400 A interface   as described by CENELEC   EN 50180 and 50181. 5. Conductor connector. 6. Cable reducer. TECHNICAL CHARACTERISTICS • The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel. • Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory. 210 mm 4 5 6/10 (12) kV 6.35/11 (12) kV 8.7/15 (17.5) kV 12/20 (24) kV 12.7/22 (24) kV 18/30 (36) kV 19/33 (36) kV 1 2 365 mm 3 7. Earthing lead. The screen break design enables cable outer sheath testing without removing or dismantling the connector. SPECIFICATIONS AND STANDARDS The separable connector 400LR meets the requirements of CENELEC HD 629.1. Separable connector type 400LR/G K400LR/G M400LR/G Voltage Um (kV) 7 6 Current Ir (A) Up to 36 kV - 400 A Conductor sizes (mm2) min 12 24 36 4 400 400 400 50 25 35 max 240 240 185