Fairmate Readyplast M ( Super ) Thin Layer Jointing Mortar For Masonry Work.

Product Details

READYPLAST M (SUPER) TM BENEFITS < Pre-mixed and ready to use. < Easy to mix, as only water is to be added at site. < No water curing is required after application. < Eliminates lengthy process of site mixing, transport and storage of all individual materials. < It is also economical as quantity of mortar is far less than conventional mortar. < Thinner layer of application for lesser shrinkage and seamless structure. < Seepage and water percolation through the joints is negligible. < Ready for subsequent application like plastering just after 24 hours of application. < Raking of joints is not required before plastering. < High adhesive strength. < Improves overall masonry strength and load bearing capacity. < Uniform and consistent quality. < High tensile adhesion for good bonding strength. < No shrinkage cracks at joints. < No curing required post application. < Replacement for conventional cement and sand mortar. < Thin bed joints and less material consumption. < Save substantial cost compared to conventional mortar. < Saves time - eliminates lengthy and cumbersome process of site mixing. PRODUCT READYPLAST M (SUPER) jointing mortar is made from a unique combination of special grade of cement, graded sand and selective polymer and additives. The unique chemical combination enables this mortar to more compact, thinner and more versatile. It is premixed and easy to use and also ensures the compaction of interlocking bricks making the bonds tougher and more durable. This mortar is specially designed to provide stronger, much more durable bonding between the blocks and superior adhesive strength. Technical Parameters complies with ASTM C 1660-09 USES < Jointing of pre-stressed concrete slabs, panels. < Jointing cement concrete floor tiles. < Jointing of concrete window and door frames. < It is recommended for masonry wall preparation by joining all types of AAC blocks, flyash bricks, flatbed concrete blocks etc with compressive strength below 6 N / mm². TYPICAL PROPERTIES Physical Appearance : Grey powder Water Powder Ratio : 0.25 Workability : Very Good Pot Life : Apprx. 2 hrs @ 27ºC 1.5 hrs@35ºC 1 hrs @40ºC Tensile Adhesion 2 Strength @ 28 days : 0.8 N/mm Dry bulk density : 1.5 to 1.60 kg/litre Wet density : 1.75 to 1.85 kg/litre TYPICAL STRENGTH DEVELOPMENT Compressive strength : PACKING AND COVERAGE READYPLAST M (SUPER) is available in 35 kg of woven bag. APPLICATION Surface Preparation : < Before the application of jointing mortar, the surface of masonry units should be slightly wet. < The masonry units should be clean, with no loose particles or dust for better bonding. < The surface must be structurally sound. < Surface defects such as cracks, holes or voids should be repaired prior to application.