Geo Textile Dimple Board (TMD 1011) White 8mm

Product Details

 91 000 74051 HDPE studded membrane, 8mm thick, with one nonwoven textileDimpled membrane with geotextile filter layer, specific for applications where high pressure resistance is required, like car parking, other heavy duty roofs, podiums and basement.STRUCTURE: heavy duty drainage and protection board on base of ecycled grade high density polyethylene (HDPE) with dimples 10mm high and a Geotextile (PP) bonded on top.Function: Drainage-Mechanical protection of waterproofing                                                                                PHYSICAL AND MECHANICAL CHARACTERISTICSRaw material                               HDPEGeotextile cone drop test              EN 13433 Mm 24 ±10%Geotextile opening size                 EN 12956 micron 105Total Thickness                             EN 9863-1 mm 10 ±10%Short term compression resistance kPa 400 ±20%Long term compression resistance kPa 90 ±20%Tensile strength                           MD/CMD EN 10319 kN/m                                                        12/12 ±20%Elongation at max load                 MD/CMD EN 10319 %                                                            60/60±25%Drain flow capacity- Horizontal application EN 12958 (S/R, 20kPa, i=0,04) l/m·s 0,6 ±20%Drain flow capacity- Limited slope applicat. EN 12958 (S/R, 20kPa, i=0,1) l/m·s 1 ±20%Drain flow capacity- Vertical application EN 12958 (S/R, 20kPa, i=1) l/m·s 3,5 ±20%Working temperature °C -30 / +80Advantages: High mechanical protection of bituminouse membranes or synthetic membrane High drainage capacity Filter layer Resistant to all natural aggressive mediums in ground water and soil Suitable for contact with soft water (aggressive to concrete) Can be installed on damp and wet substrates Substrate QualityClean, sound and dry, homogeneous, free from oils and grease, dust and loose or friable particles.                                      Notes on Application /LimitsTMD 1011 is not resistant, when exposed against permanent weathering and UV-light Value BaseAll technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due tocircumstances beyond our control.damage the environment when used as specified.Protective MeasuresLocal safety regulations must be observed.Transportation ClassThe product is not classified as hazardous good for transport.Storage ConditionsRolls must be stored in their original package, inHealth and Safety Information  horizontal position and under cool and dry conditions. They must be protected from direct sunlight, rain, snow and ice, etc. The product does not expire during correct storage.