Hydraulic Flow Meter for Any Liquid

Product Details

The operator shall bear responsibility for the suitability of the device for the specific purpose:1.Improper installation and operation of the devices (systems) will cause warranty to be void2.The manufacturer will not be liable for any damage of any kind by using its product,including, but not limited direct, indirect, incidental, punitive and consequential damages.Installation, connection, commissioning and service must be carried out by personnel who are qualified and authorized to do so.Installation personnel must ensure that the measuring system is correctly connected in accordance with the connection diagram.For applications involving high working pressures or media that can be dangerous to people, surroundings, equipment or other in the event of pipe fracture, recommends taking precautions such as special placement, shielding or installation of a safety guard or safety valve prior to installation of the sensor.This device contains electrical components with an electrical current therefore installation, services and maintenance must be carried out by expert and qualified personnel, aware of all necessary precautions. Before opening any internal parts, please shut off the power supply.The flow-meter is composed of metal and plastic parts, all of which must be in compliance with local norms and requirements concerning their trash disposal.Manufacturer's design and safety statementResponsibility for the choice of body's materials as regards abrasion, melting and corrosionresistance lies with the purchaser; the effect of any change in process medium during theoperating of the meter should be taken into account. Incorrect selection of Flow-metercould lead to a failure of the meter.Stresses and loading caused by earthquakes, traffic, high winds and fire damage are nottaken into account during meter design.Do not install the meter such that it acts as a focus for pipeline stresses. External loading isnot taken into account during meter design.During operation do not exceed the pressure and/or temperature ratings indicated on thedata label or in this Operating Manual.2 | P a g e1. PRELIMINARY NOTESThe main parts composing the flow-meter are:A. The sensor - is installed in the pipes using flanges or threaded attachments or clamp attachmentsB. The Indicator/Controller - may be installed on the sensor (in compact version), or nearby (in remote version) connected by cables.It is mandatory to clean sensor over periodically to ensure best performance.2. GENERAL PRECAUTIONSPrevent solid particles to enter in to the sensor. It may damage propeller of flow meter. To overcome the problem fixes Steiner before the sensor/Flow-tube.3. INSTALLATION OF THE FLOW-METER3.1 IMPORTANT GUIDELINES FOR CORRECT INSTALLATIONRecommended installation is in vertical/inclined pipe with upward flow direction, to minimize the wear and L maxDeposits in the sensor. Avoid installation in vertical pipes with free outlet.For a correct