Ingot Stacking Machine, 3 kw

Product Details

Arihant Ingot Stacking Machine:Combining our technical expertise with latest technological development, we offer ingot stacking line work in conjunction with our widest range of ingot casting machine.We offer stacking system to suit your stacking and space requirement, included in this leaflet are some possible design.Ingot stacking line:Overhead Gantry Type stacking machine:The stacking machine is suitable to receive ingots from casting conveyor . It can be arranged in various different configuration from in line to right angle system. It is PLC control and compressed air power system.The configurations are as follows:A chain type ingot receiving and accumulation conveyor and selective ingot turnover system.An overhead gantry type automatic stacking machine comprising of carriage mounted stacking grab.A six position stack storage conveyor of either twin chain ,chain and slat & stillage type according to stack type.The stacker will build single square stacks of nested –cross layered ingots , on either pre cast or wooden pallet bases or regular foot ingots.Automatic weighing machine and straping machine is also available at extra cost.Less complicated designSuitable for hot and dusty atmosphereThe maintenance is easier and less time consumingThe layout is more versatileSpare parts and consumables are cheaperIt is easier to re–programme.Combination of ingot casting machine and stacking system:To remove the need for external control of the ingots , each ingot is partially ejected from the mold using a synchronized hammer action connected to the movement of the mold conveyor.A fixed guide is place below the mold ejection system to remove the ingot from the ingot casting line and guide it to the take away conveyor in an inverted position.Lay out option:Different lay out option is available to suit customer requirement. The most common layouts are.Straight line layout where ingots are stacked only at one end of the chain conveyorCross over layout where ingots are stacked at both the end of the Conveyor.Turn over collator:Ingots will be presented from the out feed of the cooling conveyor generally cross wise on the conveyor having been pushed onto the short conveyor by a pusher bar mounted above the end of the cooling conveyor with a drive to the side out of the way of the heat build up.Positioning stop will ensure that each ingot is stopped briefly to it straighten up.The first ingot will be released from the stops and travel along the short conveyor. The next ingot will stop against the stops behind the first ingot.Two grippers will locate on the ends of the next ingots and rotate about a horizontal axis lifting the ingot over the stops and placing it face down after the stop. The sequence will than be repeated.Palletiser unit:This is a gantry based unit . A basic gantry structure will carry a linear axis for horizontal motion , a vertical axis for picking up and placing of the ingot layer and a rotary unit to allow the collated ingots to be placed alternately at 90 degree to each other.There are various layout that can be provided by Arihant Engineers to suit the customer requirement.System operation:After receiving ingots from ingot casting machine. The ingots travel along the length of cooling conveyor. Exhaust fans are mounted above the cooling conveyor. At the end of the conveyor the ingots will be transferred positively on to the collation conveyor.