Juki MF 7200D Series Bottom Coverstitch Machine

Product Details

Semi-dry-head, Small-cylinder-bed, Top and Bottom Coverstitch MachineThe sewing machine is applicable to the sewing of sleeve cuffs, necklines and children's wear.Small-cylinder-bed, Top and Bottom Coverstitch MachineSemi-dry-head, small-cylinder-bed, top and bottom coverstitch machine has been added to JUKI's product lineup. The small cylinder-bed and semi-dry head features have been achieved while placing priority on ease of use. The sewing machine supports comfortable "sewing" work.A world-first featureDry-head Technology- The frame no longer requires oiling.Unlike the conventional models, the oiling mechanism inside the frame has been eliminated. As a result, oil does not leak from the needle bar, presser bar or spreader shaft.- Dry-head technology has materialized a frame which does not need oiling.The needle bar mechanism and spreader mechanism have been applied with a special surface treatment. JUKI's unique special grease is used for lubrication. Grease-filled bearings have been adopted for the crank rod. These allow the machine's frame mechanism to demonstrate outstanding durability without being oiled.* Environmental consciousnessSince oil stains on sewing products are reduced, the quantity of the use of stain remover generally used in sewing plants can be reduced.*Dichlorofluoroethane (HCFC-141), which is generally used in oil stain cleaning fluid, is included in those chemicals which need to be reduced, as it is a substances that can harm the ozone layer.Outer circumference of the cylinder section is 176 mm!! *The outer circumference of the cylinder section has been reduced to 176 mm. This al lows the sewing machine to easi ly sew convent ional ly hard-to-sew small-in-diameter tubular parts such as the sleeve cuffs of sportswear and ladies' cut-and-sewn wear and the necklines of children's wear.* Outer circumference measured at the needle entry section of the small cylinder bed type sewing machineU10 Universal type (basic type) The machine can be used for the hemming process of the sleeves and bottoms of T-shirts and for the covering process for sportswear and knitwear. It is a basic one which can be used for a broader range of processes independently.The sewing machine supports hemming and covering (single-side bent and flattening) by the use of the guide supplied with the unit.K10 For coveringThis model is best sui ted to the covering processes for polo shirts, sportswear and knit outers, etc. The sewing machine has been provided as standard with an exclusive gauge (throat plate, feed dog) and guide for flattening.The sewing machine is also supplied with a guide for covering (folding over overlock seams) and a hemming guide (excluding the throat plate) as accessories.Timing Belt Drive(TBD) The sewing machine has adopted the timing-belt drive method to achieve sewing without any loss of driving force.Belt abrasion powder which can stain the product is no longer produced. Setup of the conventional belt is troublesome, but now easier setup of the belt is also achieved by the adoption of the timing belt.In addition, the motor size has been reduced to achieve energy-saving.Timing Belt Drive(TBD) The sewing machine has adopted the timing-belt drive method to achieve sewing without any loss of driving force.Belt abrasion powder which can stain the product is no longer produced. Setup of the conventional belt is troublesome, but now easier setup of the belt is also achieved by the adoption of the timing belt.In addition, the motor size has been reduced to achieve energy-saving.