MC Proof Elastic, Packaging Size: 20 Kg + 10 Kg, Liquid

Product Details

Can be applied by brush or spatulas.• Elastic and flexible membrane with high mechanical resistance• Excellent adhesion to old and new surfacesZentrifix® ElasticHigh Performance Acrylic Polymer Flexible Waterproofing membrane and Protection SystemAreas of Application• Sealing of strained basement walls• Waterproofingsystem for high water heads• Sealing and protection of bridge decks, splash zones, tunnels, cooling towers, balconies, sunken areas, retaining walls, etc• Waterproofing systems for any over or underwater applications (with suitable protective layer)• As a carbonation resistant coating in repair and protection systems• Excellent coating for areas showing changes in Geometry.Application Notes GeneralZentrifix ®Elastic is a 2 component mineral based polymer modified waterproofing and concrete protection system for specialized structures like dams, bridges, culverts, tunnels and all hydraulic structures where the water pressure is high.It is fully suitable for normal waterproofing requirement of terraces, Parking structures ,basements ,swimming pools ,sanitary areas etcAdvantagesZentrifix ®Elastic when hardened produces a seamless elastic film, Which is having a excellent water resistance. The component B of Zentrifix ®Elastic is a cement bound mineral modified mortar of proper grading While component A is an acrylic polymer modified emulsion. The crack bridging ability is about 0.7mm in normal application thickness. Additional coats increase the crack bridging characteristic.Instructions For Use Surface PreparationThe surface to be coated must comply with the principles of building construction and should fulfill the structural requirements, including properly designed slopes to avoid stagnation of water in case of roofs. Any cracks, potholes, expansion joints etc. Should be firm, clean free from fats, oil, grease, dust or any other contaminations.All loose material, dirt, grease oil dust, mould release agents etc. should be removed from the substrate to be treated. The substrate should have sufficient bonding strength, for example in case of concrete at least 1.5N/mm2 to achieve efficient and durable waterproofing layers. If the surface is very smooth, we advise to roughen by suitable methods for example by using wire brush or similar tools.Mixing InstructionsZentrifix ®Elastic consists of a powder and a liquid component. The liquid component should be emptied into a clean mixing vessel and the powder slowly added to,it.,while mixing with a slow speed mixing paddle(approx..400rpm) until a consistent ,lump free homogenous mass is produced. The mixing ratio is approximately 100 parts by weight of powder to 50 parts by weight of liquid.Zentrifix ®Elastic can be applied by trowel or brush. Before application the surface should be slightly moistened but should not be wet.Zentrifix ®Elastic can be applied in standard thickness of 2-3 mm in 2coats. Maximum thickness of 4mm is allowed and the application should be in three coats. The first coat should be carefully worked into the surface by brush in order to close the pores. Allow 3 to 4 hrs before the next coat. The final coat should be finished with a steel trowel. Do not use wooden or rubber-based finishing tools. Zentrifix ®Elastic should be applied within the temperature range of 10°C to 35°C.Curing and ProtectionZentrifix ®Elastic coatings are self-curing, but should be protected from direct sunlight, moisture, rain, frost etc. It is recommended that any protective decorative systems like tiles, wooden panels, plastic boards etc be fixed only after Zentrifix®Elastic coatings is sufficiently hardened, at least for 7 Days. Care should be taken that the layer of Zentrifix ®Elastic coating is not damaged during subsequent operations. Small damages can be retouched easily before subsequent operation