Mild Steel Jaggery Plant Sugarcane Crusher 75 TCD with Cane Carrier & Cutters

Product Details

OM KAILASH NO. 5– JUMBO HEAVY KING SIZE EXTRA HEAVY MODEL   Cane carrier having Length of 38 feet and dia 12" with M.S. Structure having 2 cutters with all required accessories. Driven by 3 H.P. Electric MotorFoundation For Both Mills Will Be Fabricated From6"X 3" M.S. channelsMill Base Fabricated From 6"X 3" M.S. channelsSIDE PLATESSide Plates shall be fabricated from tested mild steel plates duly stress relieved. Side Plates are mounted on the base frame provided with the mill.MILL ROLLERS & SHAFTSCast iron Rollers fit on ultrasonically tested M.S. Shaft conforming to EN-8 or equivalent IS standard. All the top rollers shall have cross type coupling end. The rollers shall have v-grooving (radial grooving). Juice groove shall be provided on the bottom rollers. Each roller shall be fitted with M.S. hub cut teeth Side Gears.Size of Roller – 12" Length x 11" Dia. Nominal size6- C.I. Roller, 2-Mills,A-     Roller Length - 305 mm  - Dia - 285 mm B-     Roller Length - 305 mm - Dia - 285 mm C-     Roller Length - 305 mm - Dia - 267 mm STUDS AND SETTING KEYSTop Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller settingSIDE CAPSSide caps shall be of  Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.TOP AND SIDE BUSHINGTop roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal. A+B ROLLER SCRAPERSThe scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.C-ROLL SCRAPER & STANDC-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.COUPLING & TELL BARCoupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.TOP HOLTER & PISTONTop halter shall be of Mild Steel with Piston for Hydraulic Power pack system.SIDE GEARS Each roller shall be fitted with Mild Steel Side Gears (Crown Pinions)Ø  Crusher side covers shall be fabricated from M.S. Sheet.Ø  Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.Ø  Juice Collecting bottom Tray shall be Mild SteeØ Intermediate Carrier Complete with side plates, Rubber Belt, Rollers, Sprockets & Chains.  Ø    Juice Sewer shall be Mild Steel.Driven by Planetary Gear boxes & Motors with 25 H.P,. & 20 H.P.Bagasse Carrier having length of 20 feetHydraulic Power Pack systemALS SystemSpring System