Motion Controllers MP2000 Series

Product Details

The MP2300 is an all-in-one machine controller. It has three slots for other modules and a basic module whose standard functions include those of a CPU module, an SVB module, and an I/O module. The CPU can be used to control 48 axes (when two SVB-01 modules are mounted).Short cycle time – high throughputImproved product qualityLess machine wearShort initial set-up timeLow lifecycle costFor Global Open NetworksSimply insert the optional modules in the slots to construct a global open network and expand I/O.Access to all controllers in the MP series from the Engineering PC connected to Ethernet and running MPE720.Synchronous Sequence and Motion ProcessingAchieves faster CPU processing and synchronized sequencing of motion control.The MP2300 Machine Controller controls the machine’s motions in synchronization with high-speed scanning, which helps to reduce tact time. The motion control starts within 1 scan from the start signal. Also, the MP2300 can control different motions at the same time.Maximizing the speed for arithmetic calculations is essential for high-speed motion control. The high-speed CPU processing of the MP2300 is capable of coping with large-capacity programs. Command Execution Time is 0.2ms/1,000 steps (1.4 times faster than MP930) The Program capacity of ladder program has 4k steps when the motion program has 1200k characters. (120k steps max. only with ladder program)Easy Set-upNo need to input settings because the MP2300 automatically recognizes the connected optional modules and servo drivers. The MP2300 Machine Controller also automatically recognizes the configurations of the devices connected to the MECHATROLINK network and sets the required definitions to default values. To run a motor effort is reduced to installation and wiring.Transmission Speed 100 Mbps with Mechatrolink-IIIWith high-speed network communications to servo drives, changing gains and switching the controls for speed, torque, and position can be accomplished online while the machine is running, so you can flexibly control the machine motions.With ladder works and application conversion function (Engineering Tool MPE720)An easy-to-use Windows-based editing technique for programming. Ladder programs of previous models like the MP930 can be easily converted for use with the MP2300. Total support for all stages of programming is also available.Flexible and AdaptableVarious types of systems, such as analogue or networked systems, can be constructed by combining optional modules. The distributed installation of I/O, the use of a variety of motor drives, and communication to other brands of controllers are possible.