Needle plate B1190-522-U00 Needle Plate for Juki DLM Edge Trimmer

Product Details

B1190-522-U00 1/4-Inch Needle Plate for Juki Edge-Trimming MachinesThe B1190-522-U00 Needle Plate is a 1/4-inch gauge plate designed for Juki DLM-series single-needle lockstitch machines with a vertical edge-trimming system. It is suitable for applications where accurate needle positioning and controlled fabric movement are important during sewing and edge trimming.JUKI documentation identifies B1190-522-U00 as the 1/4-inch gauge plate for the DLM-522 and DLM-5200N sub-gauge system.This replacement part is suitable for specified Juki DLM models and Jack JK-5558WB edge-trimming machines. It is supplied as 1 piece.Why Choose This Needle Plate?A correctly matched needle plate helps maintain the required needle and fabric path around the edge-trimming mechanism. The 1/4-inch configuration is especially useful when your machine is set up for the corresponding gauge specification.The polished working surface helps fabric move smoothly across the plate, while the precisely positioned needle opening supports consistent needle entry during sewing.The plate is designed for professional garment-production applications such as shirts, collars, cuffs, pocket flaps, uniforms, suits, linings and other woven garments.Key FeaturesPart Number: B1190-522-U00Gauge: 1/4 inch / 6.4 mmProduct Type: Needle/gauge plate for edge-trimming sewing machinesPack Quantity: 1 PieceApplication: Single-needle lockstitch machines with edge trimmerMachine System: Juki DLM-series edge-trimming machinesSurface: Smooth polished working surfaceNeedle Opening: Precision-positioned for the specified gaugeUse: Sewing and edge trimming of woven garmentsPart Number Variations: B1190-522-U00 / B1190522U00Cross-reference: S10573-001 is listed as a Brother 1/4-inch needle-plate reference in industry parts literature; verify your machine and existing part before using a cross-reference.Machine CompatibilityThis needle plate is intended for the following machine applications based on the supplied compatibility information and competitor listings:Juki DLM-522Juki DLM-5200Juki DLM-5200NJuki DLM-5210NJuki DLM-5400-7Juki DLM-5400N-7Jack JK-5558WBCompatible equivalent edge-trimming lockstitch configurations where the B1190-522-U00 specification is requiredThe JUKI DLM-5200N documentation specifically lists B1190-522-U00 for the H sub-gauge, 6.4 mm (1/4 inch) configuration.Machine Compatibility TableMachine Type / Model CompatibleJuki DLM-522 YesJuki DLM-5200 YesJuki DLM-5200N YesJuki DLM-5210N YesJuki DLM-5400-7 YesJuki DLM-5400N-7 YesJack JK-5558WB Yes1/4-inch DLM edge-trimmer setup YesBest Fabric TypesThis needle plate is suitable for light to medium-heavy woven fabrics used in garment manufacturing and tailoring applications.Common applications include:CottonPolyesterShirt fabricsSuit fabricsUniform fabricsWoven liningsCollar materialsCuff materialsPocket flap fabricsFor heavier materials, always confirm that your machine, needle, thread and edge-trimming setup are appropriate for the fabric thickness.Where Is It Used?The B1190-522-U00 is useful in garment-production operations where sewing and edge trimming are performed together. It can be used for applications such as:Collar stitchingCuff stitchingPocket flap productionShirt manufacturingSuit productionUniform manufacturingWoven garment productionClean edge-trimming operationsIts 1/4-inch specification makes correct part matching particularly important. JUKI’s parts documentation lists different B1190-522 variants for different gauge widths, including 3/16 inch, 1/4 inch and 3/8 inch versions.How To Replace the Needle PlateSwitch off and unplug the sewing machine before starting.Raise the presser foot and needle to a safe position.Remove the existing needle plate or gauge plate carefully.Clean lint and thread debris from the mounting area.Position the B1190-522-U00 in the correct orientation.Tighten the fixing screws securely without overtightening.Turn the handwheel manually to check needle clearance.Check the relationship between the needle opening and edge-trimming mechanism.Test sew on a scrap of the intended fabric.Confirm smooth fabric feeding and proper edge trimming before production.If your existing plate looks different or the mounting position does not match, please verify the shape and measurements of your existing part before purchasing.