NEXANS EUROMOLD KITS, 3 Core

Product Details

EUROMOLD Cable Connectors, Joints & Terminations  Nexans Euromold products include MV-HV Connectors, Joints & Terminations to connect, splice, repair and maintain medium/high voltage cable and power distribution systems – commonly referred to as cable plugs, Tee's or elbows the Euromold range of connectors suit all European DIN EN 50180 and American (ANSI) specification bushings.   The separable connector (bolted types) connect polymeric insulated cable to MV-HV transformers, switchgear, ring main units, motors or capacitors forming a screened, touch-proof cable termination compatible with gas insulated electrical equipment operating at typical voltage classes of 11kV, 33kV and 66kV.Euromold Connectors suitable for Switchgear Cable Connectors & Bushings – Medium & High Voltage Bushings Interface A to F. Contact us for most competitive prices, stocks and customer service from trained Technical Sales Engineers. Euromold Connectors Euromold connectors are premoulded EPDM cable accessories for medium and high voltage cable installations. Meeting international standards to ensure the safe distribution of onshore and offshore electricity supply – Interface C compact screened separable connectors are available for applications where confined space working for the cable connectors, such as 33kV wind turbine switchgear terminations, requires a compacted design of connector. The following Interface C tee connector, compact version, shows the features common to Euromold connector designs – a screenbreak design connector enables the cable outer sheath testing without removing the connectors from switchgear, transformer or electrical equipment. All Euromold connectors are deadbreak connectors – MV HV power has to be switched off before the connector can be disconnected from the interface bushing. Loadbreak connectors can be pulled from the MV HV electrical equipment with an insulating stick while the cable is still under load or energisation without requirement to isolate the power cables and systems. The exans Euromold range of cable terminations suitable for single or 3 core cables with polymeric or paper insulation that must be connected or terminated indoors or outdoors at medium and high voltage voltage classes 6.6kV, 11kV, 24kV and 33kV – terminations are available in a range of materials and technologies including cold-shrinkable, heat-shrinkable and Slip-on kits. Pictured opposite the Nexans AIN slip-on cable termination manufactured from silicone rubber is cold-applied with integral stress relief for terminating screened polymeric cables with XLPE or EPR insulation up to 33kV/42kV. Cable Lugs – not included, depending on voltage either MV-HV crimp lugs or shearbolt cable lugs can be used Cold Applied Termination – the termination installed to the MV-HV cable with need for heat source or heat shrinking Earthing Lugs – available as optional extra to ground or terminate bundled copper wire screens Nexans cable terminations for medium/high voltage power cables are typically used to connect 11kV/33kV cable into cables boxes, switchgear, transformers, substation busbars for overhead lines.   Euromold Cable Connectors – Elbows, Tee's & Plugs Euromold Cable Joints & Terminations – Cold Shrink & Heat Shrink Euromold Bushings MV HV Cables 11kV 33kV