Orbit 20A Switch With Indicator, Number of Module: 1M

Product Details

Key Specifications & Features Here are a few variants: [Orbit Express 20 A 1‑Way Switch with Indicator (1 M)]() — Rated 20 A, 1-way, with a built-in indicator lamp. According to Bestomart: part code 1416, current = 20A, colour = white. [Orbit Express 20 A 1‑Way Switch w/ Indicator (2 M)]() — Larger / 2-module variant, same 20 A 1-way function + indicator. [Orbit Express 20 A Dimple 1‑Way Switch w/ Indicator]() — “Dimple” design for the rocker, 1 module, with indicator. [Orbit Express Premium 20 A 1‑Way Switch w/ Indicator]() — Premium finish (also 1 M), with the indicator. Flat variant: There is also a flat rocker version: Orbit Express 20 A Flat 1-Way Switch With Indicator (1M, part code 1411-F) Common Specs: Rated Current: 20 Amps — suitable for higher load applications. Switch Type: Primarily 1-Way (on/off), depending on variant. Indicator: Built-in LED / neon (or small light) to show when the switch is ON. Helps in visibility / status. Module Size: Comes in 1-Module variants, and some 2-Module variants. Material / Design: Modular rocker made with quality materials (Orbit’s Express Modular series) — good mechanical durability. Dimensions (for 1M variant): ~ 5 cm × 4 cm × 2 cm per the product listing. --- Typical Use & Applications High-load circuits: Since it’s rated for 20A, it’s more suitable than a normal 10A switch for heavier loads — e.g., power circuits, strong lighting loads, or appliances. Status indicator: The built-in indicator helps you know visually when the switch is ON — useful for switches that control outlets or circuits where being “on” visually matters (like corridor lights, power outlets). Modular switchboard: Works well in modular plate / frame installations — if you’re building a modular wiring board, this integrates cleanly. Residential / Commercial: Suitable for both — in homes (for heavy lighting or power circuits) or commercial settings (service panels, storerooms, etc.). --- Things to Verify Before Buying / Installing 1. Confirm Load: Make sure the circuit you’re switching really requires / is safe for a 20 A switch. If your load is light, a lower-rated switch may suffice. 2. Back-box & Wiring: Ensure the wall / back-box, and the wiring is capable of handling 20A safely (correct wire gauge, good earthing). 3. Module Size: Decide between 1-Module or 2-Module variant based on your switchboard layout. 4. Indicator Requirement: Do you need the indicator? If not, a non-indicator 20A switch might be simpler / cheaper. 5. Style / Finish: Choose the variant (rocker, flat, premium) and colour that matches your décor and the rest of your modular switches. 6. Genuine Product: Buy from a trusted / authorised seller — to avoid fakes and ensure proper build quality and safety. 7. Installation: Use a qualified electrician especially for high-current switches — proper termination, tight screws, and correct earth / neutral handling is important. --- Summary The Orbit 20 A Switch With Indicator (Express Modular) is a heavy-duty modular switch variant with a built-in light to show when it’s ON.