Powder Magnicrete MAGNIJOINT block jointing mortar, For Construction

Product Details

 Magnicrete - Magnijoint is a ready to use, polymer modified high strength thin jointing mortar for laying AAC blocks, fly ash bricks, concrete blocks etc. It is the preferred choice for building masonry units where the joint thickness is reduced from 12~18 mm in conventional application and optimized to 3 mm, improving the quality of construction many folds.Thin-Joint blockwork enables wall masonry to be built very quickly without having to wait the conventional 24 hours for the mortar to set before further loading can be applied. "MAGNIJOINT" starts to set within minutes of application. This enables blockwork to be built quickly. "MAGNIJOINT" is easily mixed on site by adding the appropriate quantity of water. It is applied with a proprietary scoop or notch trowel, which will create a consistent joint thickness of 3 mm. "MAGNIJOINT" application is best suited for Aerated Autoclave blocks (AAC Blocks), Cement mortar blocks, Bricks, Cellular/ Solid concrete blocks and Fly ash bricks. For clay bricks thick bed jointing mortar is available on demand. Features and Benefits: • "MAGNIJOINT" is Pre-mixed and ready to use. Only water is to be added at site. • Economical. Ease of mix and much faster to apply and thus Eliminates lengthy and cumbersome inaccurate process of site mixing. • Transport and storage of all individual materials in Site Mixing is avoided. • Thin layer application results in structure being compact. • No water curing is required after application • Highly water resistant and hence chances of water percolation is negligible • High Bond Strength: Special polymers imparts high adhesion strength increasing the durability of masonry. • No Shrinkage Cracks: Water retention properties reduces the shrinkage cracks. • High Thermal Insulation: Thin joint prevent heat transfer through walls. • Ease of mixing and application of the mortar. • Higher tensile strength between masonry blocks. • Negligible Wastage & Higher Coverage. • 3 mm joint thickness leads to faster and economical application. • Eco friendly product. Raw materials are processed, reducing the chances of Efflorescence. About Magnicrete Products Products under MAGNICRETE brand are produced in a State-of-the-Art Plant at Rajasthan in India with German Technology. It is one of its kind, most modern Dry Mix Plant of latest technology in the world with a capacity of more than 160K MT per annum. The plant is fully automatic including the raw material handling system, mixing of various raw materials to the finished products loading system and truck loaders. Fully computerised without any or least manual intervention. The plant is equipped with very high efficiency mixers and choppers for thorough and uniform mixing of ingredients with high precision, even with dosages as low as 0.01%. The plant operation runs automatically through most advanced Supervisory control and data acquisition (SCADA) System, through PLC in a close loop system of software and hardware elements. This allows to control processes, monitor and process real time data through directly interacting with equipments and devices like sensors, screws, motors etc., which effectively reduces the chances of manual operating errors and enable to produce world class quality Dry Mix products with precision and consistent quality for Magnificient buildings. The plant is supported by in-house research and development centre of international standard, fully equipped with excellent laboratory facilities including prototype German dry mix plant, for all critical and important quality tests. It is run and managed by well experienced senior professionals having proven work experience in the industry