TAC 3T 325
HIGH STRENGTH POLYMER BASED TILE ADHESIVE
FAB (Features, Benefits & Advantages)
- High Polymer based thin set adhesive for both Internal & External Floor & Wall
- For installation of ceramic/clay/vitrified/basalt/ and porcelain / all natural stone tiles Good underwater shear bond allows this product
be to used for wet areas like swimming pools, sauna, water bodies and washrooms
To install tiles on to various substrates like: Concrete Masonry, VDF / Trimix Concrete, Cement Mortar Beds, Cement Plaster, Existing Vitrified Tile & Ceramic Tile, Brick Masonry, Cement Terrazzo and Existing Natural Stone
Coverage
Approx. 45 to 50 sq.ft. per 20 Kg pack, using 6mm x 6mm using square notched trowel for a bed of 3mm Coverage will depend on the nature and flatness of the surface and the method of application For good coverage, it is must that all surfaces are smooth, plumb, level and free from defects and undulations
Working Properties at 27° C
TAC 3T 325 Adhesive mixed with Water
| Open Time | 20 minutes |
| Pot Life | 3-4 hours |
| Time to Heavy Traffic | 16-24 hours |
| Actual performance will depend on installation methods and side conduction | |
Technical data
| IS Data | |||
| Property: Test method | Requirement | Typical Values | |
| Tensile Adhesion | Dry Condition- Annex A (Clause 5.1) | Minimum 1..5 N/mm² | 1.8-2 N/mm² |
| Wet Conditions Annex A (Clause5.1) | Minimum 1.00 N/mm² | 1.2-1.3N/mm² | |
| Shear Adhesion | Dry Conditions Annex B (Clause 5.2) | Minimum 1..5 N/mm² | 1.7-1.8N/mm² |
| Heat Ageing Annex B (Clause 5.2) | Minimum 1.00 N/mm² | 1.2-1.3N/mm | |
| Wet Conditions Annex B (Clause 5.2). | Minimum 1.00 N/mm² | 1.25-1.35 N/mm² | |
| Slip Resistance | Sipresistance Annex E(Clause 5.5) | $0.5mm | 0.40-0.45 mm |
Standard
TAC 3T 325 complies to IS 15477:2019,CML No. 8400211808 “Type 3T” Also complies with EN C2TE classfication
