Rod Probe RF Admittance Level Sensor Switch

Product Details

BIMCO ROD PROBE RF ADMITTANCE LEVEL SENSOR SWITCHWe Have specialisation in all types of Rod Probe RF Admittance The BIMCO ROD PROBE RF ADMITTANCE LEVEL SENSOR SWITCH is a simple, low cost, rugged point Level Switch designed for Leveldetec"on of Bulk materials in a bins or silo. This level switch can be used for detec"ng high, low level or for differetial level control and is used in cement industries, material handling plants, chemicalindustry, power u"li"es industry, food industry, pulp/paper industry, pharmaceu"cals industry, water / waste industry, foundry industry etc.The specialty of the probe is that it tends to ignore the build-up on the probe, thus making it suitable for application, which tends to stick on the probe.The unit has integral electronics along with time delay feature, LED indication, fail safe mode etc.Normal probe tends to fail when there is a build-up on the probe. The COAT Guard electrode senses the material build up on the probe by employing a special Build up sensing technology. The COAT guard unit is insulated from the active probe and the ground is driven with same RF frequency as that of active electrode and having the same polarity. When a material build up is formed on the probe, the RF current from the COAT guard unit tends to saturate the build-up area between COAT guard probe and silo wall, thereby no electrical energy will flow from active probe to tank wall. When the material level goes up and touches the sense probe a RF current will flow from the sense probe to ground over and above the saturated region formed by the Built up sensing circuitry.SALIENT FEATURESØ Wide range of applicationØ Easy installation and maintenance.Ø Weatherproof/Flameproof enclosure as per requirementØ Sturdy electrode to withstand impact due to accidental clinker forma"on Ø Ceramicinsulated electrode capable of withstanding 450°C Ø No moving parts, no mechanical wearand tear.Ø Adjustable differenyial time delay with ON/OFF "ming.Ø Fail Safe High/Low Selection Feature (Field configurable) AvailableØ Ignores Build Up of Sticky and Conduc"ve Material between Probe and VesselWallsSPECIFICATIONSSUPPLY VOLTAGEOUTPUT TYPECONTACT RATINGCABLE ENTRYTEMPERATUREPROBEMATERIALSMOUNTINGFREQUENCYTIME DELAYFAIL SAFE230VAC or 110VAC or 24V DC (factory selectable)1 DPDT Relay05 AMPS at 230VAC /24VDC, Resistive load DualPG 16, etc.0-100°C for integral type.0-250°C for integral with Standoff, type0-450°C for Remote with Standoff, typeType: Rigid Probe with Coat guard electrode Insulation:Teflon/Ceramic (for high temperature)Probe Length: As per requirement, Housing: Cast Al.Probes (Sense & Shield SS316/SS304), Flange/Adapter: SS316/SS304/C.S.Flanged or threaded process connection as per requirement.Weatherproof as per IP 66 Flameproof (optional)120 KHz(±10%)0 To 30 seconds adjustableWith ON/OFF delay SelectionSelectable.INFORMATION REQUIRED Before PurchaseØ Process Parameters: Temperature, pressure, atmosphere hazardous /non- hazardous.Ø Application media characteristics: Sp. Gr., Dielectric constant, h azardous or not, corrosiveness, viscosity.