Sandblasting Copper Slag

Product Details

1. Sand blasting with copper slag (also known as iron silicate) is one of the most popular methods for heavy-duty industrial cleaning. It is a byproduct of copper smelting that is quenched in cold water to produce hard, angular granules.

   Because of its high density and "sharp" nature, it is often preferred over silica sand for stripping tough coatings and rust.

   1. Why Copper Slag? (The Advantages)

   • High Efficiency: Its angular shape acts like thousands of tiny knives, cutting through rust, mill scale, and old paint much faster than rounded abrasives.

   • Low Free Silica: Unlike traditional sand, copper slag contains less than 0.1% free silica. This drastically reduces the risk of silicosis, a deadly lung disease.

   • High Density: It is roughly 20% heavier than other mineral slags (like coal slag). This extra mass means it hits the surface with more kinetic energy, increasing productivity.

   • Low Dust: It is a very "tough" material with low friability (it doesn't shatter easily on impact), which keeps the workspace clearer and improves visibility for the operator.

   2. Technical Profile

   Property	Typical Value
   Hardness	6.0 – 7.0 (Mohs Scale)
   Shape	Sharp, Angular, Multi-faceted
   Color	Glassy Black / Dark Grey
   Bulk Density	100 – 120 lbs./cu. ft.
   Specific Gravity	~3.4 g/cc

   3. Grading and Surface Profiles

   Copper slag is sold in different "mesh" sizes depending on how deep a "profile" (the roughness left on the metal) you need for your new paint to stick.

   • Medium (12/40 Mesh): Creates a profile of 3.0 – 5.0 mils. Best for heavy rust, thick marine coatings, and bridge maintenance.

   • Fine (20/50 Mesh): Creates a profile of 2.0 – 3.5 mils. The "general purpose" choice for new steel and typical refinery maintenance.

   • Extra Fine (30/60 Mesh): Creates a profile of 1.0 – 2.5 mils. Used for light rust removal or on thinner metals where you want to avoid warping.

   4. Comparison: Copper Slag vs. Garnet

   While copper slag is the "budget king" of heavy-duty blasting, it is often compared to Garnet, the premium alternative.

   Feature	Copper Slag	Garnet
   Cost	Very Low ($)	High ($$$)
   Reusability	1 – 2 times (mostly expendable)	3 – 5 times (highly recyclable)
   Cleaning Speed	Fast	Very Fast
   Environmental	Can contain trace heavy metals.	Natural mineral; very "green."

   5. Safety Checklist

   1. Air Supply: Always use a Type CE supplied-air respirator (blast helmet). Even though it has low silica, the paint or rust you are removing (like lead paint) can be highly toxic.

   2. Encapsulation: Because copper slag is an "expendable" (one-time use) abrasive, it creates a lot of waste. Use plastic sheeting or "containment" to prevent the spent grit from entering soil or waterways.

   3. Static Grounding: Ensure your blast hose is internally grounded to prevent static shocks, especially in refineries or tanks.

   Would you like me to help you determine the specific mesh size you need for a certain paint thickness, or are you looking for a disposal guide for spent copper slag?