SHIVA MAKE Double Gantry Goliath Crane, Lifting Speed: 0.5 - 7 Mpm, Indoor And Outdoor Type

With the help of our state-of-the-art infrastructure unit, we are able to manufacture and supply the supreme quality of Gantry Goliath Crane . Our offered crane is extensively used in various industrial areas such as factories & construction sites, to eliminate the safety risk. Our offered crane is checked by our quality controllers on various parameters before providing it to the clients. We also provide this crane to the clients within a set time frame.

Features:

Optimum performance
Enhanced service life
High load capacity
Applications:

Shipyards / container depot
Granite & Marble cutting and polishing Industries
Steel yard
Cement Pipe Industries
Product Description:

The main bridge girders are fabricated from high quality steel plates forming a rectangular box section. The girders are provided with the required camber so that the girder deflection in full load condition will remain well within its allowable limit of 1/900. Internal surface of the box girder is free from corrosion as the box is welded and there is not contact with outside atmosphere.

Maintenance: It is easy to carry out maintenance of the crane and clean it. Here provide hand railing platform for easy maintenance in one side or both side as costumer requirement

Gear Box:

All the gear boxes which are used in Hoisting, L.T. and C.T. are horizontal shaft helical gear type with robust and sturdy M.S. fabricated housing. The entire gear assembly is running on anti-friction bearing. The pinions which are used in the gearbox are integral and solid one piece pinion. All gears and pinions are duly hardened to with-stand the heavy loads for the life span depending upon the class of application. Provision is kept for the filling the lubricating oil with level indicator.

Rope Drum:

Rope drum is fabricated out of M.S. plate or made out of seamless pipe. The drum is accurately machined and grooved to accommodate the desired size of rope. The length of the drum is selected in such a way that the entire rope can be wound in one layer.

Long Travel:

For long travel arrangements following methods are used.

Center Drive Arrangement:

In this system of long travel arrangement, long travel motion is availed through centrally located helical gearbox. The power is transmitted through L.T. Shaft running on pedestal bearing and connected with the Gearbox, Floating shaft and Universal joint assembly. The floating shaft is connected to the L.T. wheel and gear box by means of flexible geared coupling. The motor and gear box are connected by means of universal joint.

Twin Drive Arrangement:

In this arrangement L.T. Drive system is provided at each end carriage by individual driving system. Both the drive comprises of a Motor, Gearbox, Floating shaft and Universal joint assembly. The floating shaft is connected to the L.T. wheel and gear box by means of flexible geared coupling.

The motor and gear box are connected by means of universal joint
In case of goliath / gantry crane only twin drive arrangement possible

Motors:

In cranes two types of motor uses crane duty induction motor or slipping motor. As per class of crane or costumer requirement.

Brakes:

In cranes many types of brakes are use. Selection of brake is depends on class of crane and costumer requirements.