Sika floor 264hc

Product Details

- PART EPOXY ROLLER AND SELF-SMOOTHENING TOPPING DESCRIPTION Sikafloor®-264 HC is a two part, coloured epoxy resin. USES Sikafloor®-264 HC may only be used by experienced professionals. Sikafloor®-264 HC may only be used by experienced professionals. Sikafloor®-264 HC is used as: Self-smoothening topping & Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. Production area, storage and assembly halls, maintenance workshops, garages and loading ramps. ▪ Seal coat for broadcast systems, such as multi-storey and underground car parks, maintenance hangars and for wet process areas, e.g. beverage and food industry ▪ CHARACTERISTICS / ADVANTAGES ▪ Good chemical and mechanical resistance ▪ Easy application ▪ Liquid proof ▪ Gloss finish ▪ Slip resistant surface possible APPROVALS / STANDARDS Particle emission certificate Sikafloor-264 HC CSM Statement of Qualification – ISO 14644-1, class 4– Report No. SI 0904-480 and GMP class A, Report No. SI 1008- 533. ▪ Outgassing emission certificate Sikafloor-264 HC: CSM Statement of Qualification – ISO 14644-8, class 6,5 - Report No. SI 0904-480. ▪ Good biological Resistance in accordance with ISO 846, CSM Report No. 1008-533 ▪ Fire classification in accordance with EN 13501-1, Report-No. 2013-B-2119/01, MPA Dresden, Germany, June 2013. ▪ 2-part epoxy roller and seal coat according to EN 1504-2: 2004 and EN 13813:2002.APPLICATION INSTRUCTIONS SUBSTRATE QUALITY / PRE-TREATMENT The concrete substrate must be sound and of sufficient compressive strength (minimum 25 N/mm2) with a minimum pull off strength of 1.5 N/mm2. ▪ The substrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. If in doubt apply a test area first. ▪ Concrete substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and achieve an open textured surface. ▪ Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. ▪ ▪ Repairs to the substrate, filling of blowholes/voids and surface levelling can be carried out using appropriate products from the Sikafloor®, Sikadur® and Sikagard® range of materials. The concrete or screed substrate has to be primed or levelled in order to achieve an even surface. ▪ ▪ High spots must be removed by e.g. grinding. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum.