Silver Nitronic Alloys Rod

Product Details

- Nitronic 60 (Alloy 218)Nitronic 60 (Alloy 218) (UNS S21800) Fe 63, Cr 17, Mn 8, Ni 8.5, Si 4, N 0.13High strength fully Austenitic alloy that resists galling and wear. Significantly lower cost to extend part life and lower maintenance. The yield strength is twice that of 304 and 316 stainless steels, in the annealed condition. Tensile strengths can be produced in excess of 200 ksi. Chloride pitting is superior to that of type 316, and the oxidation resistance is similar to type 321 at elevated temperatures, and excellent cryogenic impact strength. Valves stems, seats, and trim; fastening systems, screening, pins, bushings, roller bearings, pump shafts and rings. Food handling, medical, automotive, aerospace and nuclear. Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a wear alloy, and subsequently has good high temperature properties for temperatures around 1800 °F. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. The additions of Silicon and Manganese have given this alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and are still fully austenitic after severe cold-working. - Nitronic Alloy 50 (XM-19)Nitronic 50 (XM-19) (UNS S20910) Fe 57, Cr 22, Ni 13, Mn 5, Mo 2, Si 1High strength Austenitic with superior corrosion resistance to types 316 and 316L, with approximately twice the yield strength in the annealed condition. Also fully Austenitic, this alloy stays non-magnetic when severely cold reduced. Cryogenic properties are also outstanding as well as elevated temperatures. Pumps, valves, fittings, fasteners, cables, chains, wire cloth, marine hardware, shafts, and springs.Nitronic 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. In addition, Armco Nitronic 50 Stainless has very good mechanical properties at both elevated and sub-zero temperatures. And, unlike many austenitic stainless steels, Nitronic 50 does not become magnetic when cold worked. * Nitronic Alloy 30 Low alloy version of NITRONIC 60, primarily used for abrasion resistance only.Corrosion and abrasion resistant, tough and durable, Nitronic 30 is the stainless steel for your abrasive needs. Ball mill tests have shown that many application standards, such as AR 500 suffer six to seven times as much metal loss as Nitronic 30.Economical, low alloy, corrosion resistant, abrasion resistant stainless steel. This is a popular replacement for carbon steel, due to the resistance to outside weather conditions.