Steep Angle Cleated Belt Conveyor For Food Processing Industries

Product Details

Description:Corrugated Sidewall / Pocket / Cleated type belt conveyors are also named as High Angle or Steep Angle Conveyors, which are used to transport material from 0o horizontal to 90o vertical lift with zero spillage. The design of the corrugated Sidewalls is such that they have excellent resistance to idler penetration on return side supports. Sidewall conveyor carries abrasive or corrosive material with substantially less wear & tear. It can convey many different types of bulk materials.The Cleated Belt Conveyor Range offered by Bevcon Wayors enables conveying of bulk materials over very steep angles up to 90 degrees. Our design provides for tight product transfers and the ability to fit into space-constrained areas. Advantages of Bevcon Wayors' Cleated Belt Conveyors: •No Transfer Point: Once material loaded onto the horizontal feed point & its stays within the belt until discharged at the head end without transferring from one system to another by reducing dust and pollution.•Prevents Product Degradation: From the feed hopper to the discharge point, the belt is capable of turning through any angle up to a vertical line and back to the horizontal. This eliminates the need for multi drives and prevents product degradation.•No Spillage: Once material is loaded onto the belt in between sidewalls, its prevented by the cross cleats from falling back & also ensures that material remains within the belts effectively along the conveying line.•Maximum utilization of space: In areas of dockside / existing plants where space is a problem, SAC provides the ideal solution & ability to convey material at angles up to 90O wit minimal ground space•Minimum Maintenance, Long Belt Life: Sidewall belt conveyor in comparison to mechanical elevators has considerable advantages & it has been proven. The belt itself requires no maintenance and the reduced number of moving parts plus simple conveyor construction virtually eliminates costly downtime. Components used in this system have been developed from high strength abrasion and wear resistant material to extend operational life.•Wide Range of Materials can be handled: With the extensive range of belt sizes available, system is capable of handling almost all materials: large lumps, free flowing, delicate or fragile substances, highly abrasive material, light weight or heavy loads.•Low Power Requirement, Quiet & Smooth Running: A clear advantage of Conveyor Belt system is the low power required to move the loaded belt. As the belt runs on rotating idlers, the low resistance results in a quiet system, an advantage when operating in close proximity to personnel. Aplication:PowerSteelCementFAFA PlantMunicipal Solid WasteConstruction industrySugarFertilizerChemicalRecyclingAgricultureAggregate