Stone Sealer Stoneshiled SS Color X Super supplier dealer distributor in Mumbai

Product Details

Natural Look Penetrating Sealer for:    Uses:  All types of Natural Stone like Sandstone, Marble, Granite, Travertine, Slate, Satillo. Composite Marble, Engineered Stone, Clay Tiles, Bricks, Masonry, Plastered Walls, Cement etc… Grouts Interior & Exteriors, Floorings, Claddings, Dados, Kitchens, Showers, Restrooms, Pool Areas, etc… Special Features:         Unique hydrid system which maintains the natural look of the surface and keeps it breathable.  Does not form a film. Solvent based formula penetrates deep into the surface giving maximum life.  Non-yellowing. Protection against water and oil based stains,  Dirt & Dust repellant.  Anti-fungus, mould, mildew, etc… Salt resistance, acid resistance, weather resistance, freeze/thaw resistance.  Directions for Use:         Notes:      Surface must be dry and free of contaminants, including previously applied sealers, dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime.  Clean the surface with ample water or with suitable cleaners.  Once the area has completely dried, proceed with the sealing of the surface for water and stain resistance.  Apply StoneShield TOP COAT to the entire surface also covering the grout with a paint brush. Any excess sealer that gets on the surface should be wiped off with a clean towel before it dries. Be careful not to allow the sealer to puddle or dry.  Repeat the above step for a second coat of the sealer. Please note that if the first coat is applied properly very less material will be required in the second coat. Light buffing may be required to even-out/remove the excess sealer and wipe of the brush marks if any.  Avoid traffic on the surface for 24-72 hours. In case, traffic is unavoidable, cover the surface with a porous cloth or mattress.  After the prescribed time the surface is ready to use.  Before sealing any surface, test several inconspicuous test patches to assure maximum performance. Client has to determine the suitability of the product for the intended use and StoneShield stands no Warranty for its performance for improper application methods otherwise only if done by authorized and certified StoneShield applicators. Coverage of the product will depend on porosity of the stone and StoneShield stands no Warranty if porosity of stone not saturated by improper application or less application of material. For any warranty related matters coverage should be certified by StoneShield with documentary evidence with respect to it. To protect adjoining areas, masking tapes to be used for the surface area to be sealed.  Store StoneShield TOP COAT in the original container, properly sealed to avoid contamination and solvent evaporation. Stored at 40 C (77 F), StoneShield TOP COAT will have a shelf life of 24 months. Pack Sizes – 500 ml, 1 Litre, 5 Litres, 20 Litres Emergency First Aid Procedure: Ingestion - Do not induce vomiting. Call a physician. Eye Contact – Flush thoroughly with water for at least 15 minutes. Call a physician if eye irritation persists. Launder affected clothing before re-wearing. Inhabitation – Move to fresh air, call a physician if respiratory irritation persists.