StoneShield S S Solv natural stone Sealer & Impregnator coating, 1 liter

Product Details

Natural Look Penetrating Sealer for:  All types of Natural Stone like Sandstone, Marble, Granite, Travertine, Slate, Satillo.  Composite Marble, Engineered Stone, Clay Tiles, Bricks, Masonry, Plastered Walls, Cement etc…  Grouts Uses:  Interior & Exteriors, Floorings, Claddings, Dados, Kitchens, Showers, Restrooms, Pool Areas, etc… Special Features:  Maintains the natural look of the surface and keeps it breathable.  Does not form a film.  Solvent based formula penetrates deep into the surface giving maximum life.  Non-yellowing.  Protection against water and oil based stains,  Dirt & Dust repellant.  Anti-fungus, mould, mildew, etc…  Salt resistance, acid resistance, weather resistance, freeze/thaw resistance. Directions for Use:  Surface must be dry and free of contaminants, including previously applied sealers, dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime.  Clean the surface with ample water or with suitable cleaners.  Once the area has completely dried, proceed with the sealing of the surface for water and stain resistance.  Apply StoneShield Solv to the entire surface also covering the grout with a paint brush. Any excess sealer that gets on the surface should be wiped off with a clean towel before it dries. Be careful not to allow the sealer to puddle or dry.  Repeat the above step for a second coat of the sealer. Please note that if the first coat is applied properly very less material will be required in the second coat.  Light buffing may be required to even-out/remove the excess sealer and wipe of the brush marks if any.  Avoid traffic on the surface for 24-72 hours. In case, traffic is unavoidable, cover the surface with a porous cloth or mattress.  After the prescribed time the surface is ready to use. Notes:  Before sealing any surface, test several inconspicuous test patches to assure maximum performance. Client has to determine the suitability of the product for the intended use.  To protect adjoining areas, masking tapes to be used for the surface area to be sealed.  Store StoneShield Solv in the original container, properly sealed to avoid contamination and solvent evaporation. Stored at 40 C (77 F), StoneShield Solv will have a shelf life of 18 months.  Pack Sizes – 500 ml, 1 Litre, 5 Litres, 20 Litres, 30 Litres, 200 Litres Emergency First Aid Procedure: Ingestion - Do not induce vomiting. Call a physician. Eye Contact – Flush thoroughly with water for at least 15 minutes. Call a physician if eye irritation persists. Launder affected clothing before re-wearing. Inhabitation – Move to fresh air, call a physician if respiratory irritation persists