Taber Abrasion Tester i9 (Digital)

Product Details

OVERVIEW TABER Abrasion Tester is meant to perform accelerated wear testing. The Equipment is Capable of providing reliable data in a few minutes compared to the years that may be required by in-use testing, Abrasion Tester is used to test a wide spectrum of materials including plastics, coatings, laminates, leather, paper, ceramics, carpeting, safety glazing, etc. Paramount Taber Abrasion i9™ is an Advanced model Equipment to measure the wear resistance of material through Abrasion mounting a flat specimen approximately 100mm square or round to a turntable platform that rotates on a vertical axis at a fixed speed. The standard material thickness that can be evaluated with the Rotary Abraser is 6.35 mm (materials greater than 6.35 mm but less than 40 mm can be tested with optional accessories). Two abrasive wheels, which are applied at a specific pressure, are lowered onto the specimen surface. Characteristic rub wear action is produced by contact of the test specimen against the sliding rotation of the two abrading wheels. As the turntable rotates, the wheels are driven by the sample in opposite directions about a horizontal axis displaced tangentially from the axis of the sample. One abrading wheel rubs the specimen outward toward the periphery and the other, inward toward the center while a vacuum system removes loose debris during the test. The wheels traverse a complete circle on the specimen surface, revealing abrasion resistance at all angles relative to the weave or grain of the material .  SALIENT FEATURES: To Determine the Wear Resistance of material thru Abrasion and also to measure the Wear resistance degree like Mass Loss, Thickness Loss etc. Highly suitable for Flat products like Suitcases, Carpet, Leather, Cardboard, glass, /plastics, traffic Paints, Automobile Interior etc. Sturdy & Ergonomic Equipment for Accurate & Reliable Results. Precision Engineered components for continuous operations Adheres to National & International Standards   STANDARD ACCESSORIES   Main unit: 01No.  Detailed User's Manual: 01No. Inspection & Conformance Certificates: 01No. Calibration Certificates: 01No.  TECHNICAL DETAILS   TAT-001: Rotary Abrasion Tester Specimen: Φ108mm,thickness 3mm Load: 250,500,1000g Grinding wheel: Φ50.8mm, 12.7mm Space between wheels: 63.5mm Grinding wheel and Plate's space: 37-38mm Grinding wheel: Φout diameter 88.9mm,            inside diameter 63.5mm Rotating speed: 60r/min,72r/min Counter : LCD.0- 999.999 Distance in specimen : 3mm Overall Dimensions : 55x32x32cm Weight : 20kg RELATED STANDARDS : SATRA TM 163, ASTM D3884. ASTM D1175, ASTM D4060, TAPPI T476, JIS K 7204, DIN 52347 etc. etc.