Thermostatic Steam Trap, Size: 15 mm

Product Details

Product DescriptionOther Details: The enthalpy in the steam basically has two components. The Latent heat and the Sensible heat. Whereas condensate has only sensible heat. This condensate has to be removed as soon as it is formed, because it hinders to efficient heat transfer as well as leads to water hammer phenomenon as it is hot water (having more Specific Gravity) that moves with high velocity of steam (8 to 10 times higher than water), carrying enough momentum to rupture pipes and which is damaging to the plant pipelines as well as piping equipments. Hence, need to remove condensate from steam main and trap steam. This is done by steam trap. The thermodynamic traps separate condensate and steam based on velocity which in case of steam is higher than that of condensate. These are used mainly on drip lines of the main steam distribution line, platen presses and super heated steam lines to remove condensate. Condensate pressure is used to open the trap by lifting the disc, discharging condensate in low pressure. Due to low pressure flashing of condensate takes place. High flash steam velocity (approximately 5 times of condensate) creates a low pressure zone below the disc. Accumulated flash steam force over the disc becomes greater than the incoming condensate pressure this leads to closure of the disc. Subsequently the flash steam condenses and the incoming higher pressure condensate pushes the disc opening the trap and thus the cycle continues. Features Thermostatic Steam trap works on the difference in Enthalpy of Steam and Condensate. A capsule attached to a Bellow filled with precise amount of a Hydrocarbon, Expands and contracts in response to the rising/lowering of Enthalpy. Thereby shutting and opening the valve. Condensate has lower Enthalpy, causing the bellow to contract and the seat to retract which opens the valve and allow discharge of condensate. The reverse happens with the steam and its higher Enthalpy. These traps used largely on Tracing lines or Tank Farms where steam is supplied to maintain Temp / viscosity of the Oil. UKL Thermostatic trap has a unique Simple design, Minimum number of components and where the Bellow is enclosed and protected thus ensuring long life for the BellowsWe are looking bulk inquiries from Lucknow, Kanpur, Varanasi, Jaipur, Jodhpur, Ajmer, Bikaner, Kota, Rajasthan, Jammu, Srinagar, J&K, Chhattisgarh, Chandigarh, Jalandhar, Amritsar, Ludhiana, Bathinda, Pathankot, Patiala, Hoshiarpur, Himachal Pradesh, HP, UP, MP, Shimla, Dharamshala, Uttarakhand, Dehradun, Haridwar, Roorkee, Rudrapur, Rishikesh, Nainital, Udham Singh Nagar, Indore, Bhopal, Jabalpur, Gwalior, Ujjain, Sagar, Ratlam, Satna, Dewas, Bihar, Patna, Gaya, Bhagalpur, Muzaffarpur, Jharkhand, Jamshedpur, Dhanbad, Ranchi, Haryana, Karnal, Ambala, Panipat, Rohtak, Hisar, Faridabad, Gurgaon, Rajasthan, Jammu, Srinagar, J&K, Chhattisgarh, Raipur, Bhilai, Bilaspur Guna, Gorakhpur, Berhampur, Markapur, Hyderabad, Bilaspur, Indore, Mumbai,  Rewa, West Champaran,  Bhopal,  Lucknow, Motahari,  Guwahati, Katihar,  Muzaffarpur,  Chhatarpur, Satna,  Doda,  Rohtas,  Jaunpur,  Giridih,  Biharsharif,  Chatra,  Jamtara,  Ballia,  Kolkata,  Mahbubani, Ratlam,  Sambalpur,  Varanasi,  Balaghat,  Visakhapatnam,  Gwalior, Siwan, Samastipur,  Raipur,  Damoh, Vijayawada, Munger, Nawada, Bettiah, Sidhi, Kanpur, Jamshedpur, Delhi, Shillong, Darbhanga, Chhindwara, Chapra, Srikakulam, Ranchi, Gurgaon, Bokaro Steel City, Banka, Garhwa , Bhubaneswar, Balangir, Vaishali, Chittorgarh, Hazaribagh, Patna, Gaya, Aizawl,  Lakhisarai, Supaul,  Dhanbad, Dewas,  Saharsa, Bhagalpur, Auraria,  Bhind and all over India.