Waterproofing Coating Crack Filler Ultratech Seal & Dry 5 Plus, Packaging Size: 20

Product Details

UltraTech Seal & Dry 5 PLUS is an Acrylic Polymer based multipurpose bonding agent. Packaging 1 Kg, 5 Kg, 10 Kg, 20 Kg Shelf Life UltraTech Seal & Dry 5 PLUS has a shelf life of 18 months from the date of manufacture. Store at cool and dry place. Safety Directions UltraTech Seal & Dry 5 PLUS is non-toxic. Use of gloves and goggles recommended. Any splashes to the skin or eyes should be washed off with clean water. In case of prolonged irritation, medical advice should be sought. UltraTech Seal & Dry 5 PLUSis non-flammable. Other Product Categories available with UltraTech Building Products Division   Tile Adhesives   Micro Concrete and Repair Product   Industrial/Precision Grout and Anchors   Injection Grouting Material   Plasters and Jointing Mortar   Floor Screeds   Autoclaved Aerated Lightweight Concrete Blocks ULTRATECH UltraTech Cement Limited (Building Products Division) 30214100/4400 DISCLAIMER Information provided on this data sheet is the guideline for usage. Users are advised to undertake a trial for product suitability prior to it's full scale usage. There is no implied guaranty/warranty for the results and the company is not liable for any consequential damages. DIRECTIONS FOR USE Mix Ratio - Seal & Dry 5PLUS : Grey Cement Mix Ratio - Seal & Dry 5PLUS : White Cement Coverage / kg Note:- • The adhesion strength between concrete / plaster and reinforcement is not hampered by using UltraTech Seal & Dry 5 PLUS. Anticorrosive Rebar Coating 1:1.5 75 RMT @ 1mm thickness for 10mm dia Bar. Crack Filling Tile Joint Filling Priming / Key Coat (50% water by wt) 100 ml per 1 kg of white cement 250 RMT @ (2mm X 6mm Tile Joint) 1:0.5 1:0.5 75 Sft/Kg in single film coat As a waterproofing coat   Apply mix of Ultratech Seal and Dry SBR with grey cement in the ratio as per the table given on next page. Application Solid content : 50% +- 1% by weight in the solution PH value : 7 to 8   Easy and simple to use.   Provides excellent water impermeability.   Ensures good workability.   Provides good bonding and adhesion.   Provides toughness and flexibility.   Excellent material for repair and renovation. Description 50 ml per 1 kg of white cement 85 RMT @ (6mm X 6mm "V" Groove) Waterproofing 1:3:8 (S&D 5 Plus, Water & Cement) 100 Sft/Kg @ 1mm Thickness Areas of Application UltraTech Seal & Dry 5 PLUS is recommended for standard / general waterproofing of bathrooms, sunken areas, terrace and water tanks. It is recommended for crack filling and tile joint filling by mixing along with white cement. It can be used by mixing with water, directly as a priming/key coat over plastered surfaces and putty before painting to cover the minor surface shrinkage cracks. UltraTech Seal & Dry 5 PLUScan also be used as an anti -corrosive protection coating over new and old reinforcements.   Prepare the surface by removing oil, bond inhibiting agents, dirt, dust and laitance.   Clean the surface with wire brush/water jet/mopping.   Wet the surface with water and bring it to Surface Saturated condition   Corroded reinforcement bars should be exposed, cleaned and treated with an anti corrosive product