Waterproofing Coating Dr Fixit Raincoat Elastomeric, Packaging Size: 20kg

Product Details

XDr. Fixit Raincoat is composed of high quality acrylic emulsion polymer, light fast & weather durable pigments, properly selected & graded fine fillers, many additives & water as a medium. It is used as a waterproofing & protective coating for exterior walls of the buildings because it forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and an excellent resistance to the growth of microorganisms. Areas of Application } All types of exterior masonry surfaces, concrete, cement sand renderings, etc. } Applicable on asbestos sheets. Features & Benefits } Film thickness - Higher film thickness provides resistance to the movements of structures, gives crack bridging ability & waterproofing properties. } Flexibility - Flexible and covers hairline cracks(upto 0.5 mm) effectively so that no ingress of water. } Toughness - Tough films withstands wind driven rain. } Elasticity - High elasticity easily withstands stress caused by thermal expansion & contraction (>100% elongation at 110-120 micron DFT). } Ready to use – No dilution is required hence ensures desired film thickness built-up without affecting the performance. } Microbial resistance – Resistance to fungus and algae hence maintains the aesthetic value. } UV resistant – Resistance to UV (Sun light) hence coating has longer life. } Dirt pick up – Very low dirt pick up & can be cleaned easily hence maintains the aesthetics. } Breathability - Permeable to water vapour. } Ease of application – User friendly, easily applicable by brush, roller or spray. } Toxicity - It is Non-toxic. Method of Application 1 SURFACE PREPARATION } All new cement-sand renderings /concrete surfaces should be allowed to age 6 to 8 weeks before surface coating. } Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. by mechanical means such as wire brushing & shot blasting . } Finally vacuum cleaning of all loose solids and liquids can be done, if required. } All surface cracks upto 5 mm width should be filled up with Dr.Fixit Crack-X or Dr.Fixit Unifiller. Cracks more than 5 mm and all separation gaps should be filled up with Dr.Fixit Pidicrete URP or Dr.Fixit Unibond SBR modified mortar or as specified. 2 Priming } Prime the surface with Dr. Fixit Primeseal diluted with potable water by volume in 2:1 ratio (2 parts primer and 1 part water) and allow it to dry for 2 to 3 hours