Weiber Clean Room Air Shower

The Personnel Air Shower from Weiber are fully self-contained units, designed to provide complete decontamination solutions for various clean room applications. They are ideally installed at the entrance of a clean room or controlled environment chamber to minimize the entry of dust and particulate matters inside the clean room via the clothes and skin surfaces of the personnel. Our Clean Room Air Shower feature programmable operating modes for flexible application and microprocessor based controller for precise supervision of the operating parameters. They use highly efficient pre-filters and HEPA filters for maintaining highly sterile working environments and an integrated fan/blower assembly to provide high velocity air streams for maximum scrubbing action against dust and particulate matters adherent on the exposed skin, clothes and material surfaces.

3 types of configurations are available:

One side flow: The unit allows one-way operation, with the clean side door locked and the grey side door unlocked at the idle state. This mode of operation helps in controlling the flow of traffic in and out of the clean room for maintaining maximum sterility in the working area.

Two side flow: The unit allows both side flows, allowing the Air Showers to be activated in both the directions. The user can exit through the clean room door or the grey side door, without compromising the sanctity of the clean air environment. This mode of operation prevents the egress of harmful contaminants from the clean room to the outside environment, making the unit particularly useful in pharmaceutical industries, animal research laboratories and other applications that require working with harmful and biohazardous substances.

Tower flow: the flow is from the upper roof of the shower.

The fully automatic operation prevents the need for manual switching on/off of the air shower cycle and the shower time, providing an unmatched ease of use. The incorporated safety features such as magnetically operated interlocked doors, the auto reset feature and an array of alarms and LED indicators for actual and set parameters prevent accidental lockouts and ensure smooth functioning of the unit.

Compatible Standards:

• ISO 14644-1
• FS 209-E
• EN 1822 (H13)
• IEST-RP-CC001.3
• IEST-RP-CC007
• IEST-RP-CC034
• IEC-61010-1
• EN- 61010-1
• UL-61010-1

Special Features:

• High velocity shower jets in excess of 20 m/s ensure efficient scrubbing action to remove particulate matter.
• Programmable operating modes
• Solid state programmable microprocessor based controls for various operating parameters
• Fully washable pre-filters remove around 85% of particulate matters, therefore reducing the load on HEPA filters and increasing their efficiency and life span
• Highly efficient HEPA filters with around 99.99% filtration efficiency for removing particles as small as 0.3 microns and larger.
• Floor matting operated switch for sequential operation of the air shower
• Multidirectional air flow
• Adjustable air nozzles
• Permanently lubricated direct drive centrifugal motors and efficient blowers for maintaining appropriate face velocities of the air (6000 ft/min + 20 feet), while producing minimum vibrations and noise (less than 60 db)
• Indicator lights on both sides of the air shower for regulation of traffic within the cubicle
• Emergency buttons on both sides of the air shower to prevent accidental lock-outs
• Interlocked doors minimize any chances of contamination
• Door interlocks operate on the magnetic system
• Hinged motor/blower compartment access panels made of coated aluminium