White Gyproc Xpert Stucco Gypsum Plaster, Packaging Type: Bag, Packaging Size: 25 Kg

Product Details

Gyproc Xpert is a stucco gypsum plaster made for application on almost all backgrounds, e.g. brickwork, block work or concrete, as punning agent, creating bull marks and level strips. It consists of Gypsum Hemihydrate formulated with special additives for enhanced working and setting characteristics (10 minutes). It provides perfectly lined and leveled shiny surface without the worry of wastage giving a class leading coverage. Description Features • Extra whiteness • Doesn’t require water curing • No shrinkage cracks • Non-combustible (when tested in accordance with BS: 476: part 4:1970), therefore a good form of thermal protection to the building structure. • Use of light weight aggregates in the plaster mix help to improve the Thermal resistance. (Thermal Resis- tance R = 0.07m²K/W at 13mm thickness) • GRIHA and Greenpro Certified Technical & Physical Parameters Dry Bulk Density 880 Kg/m3 (Max) Wet Bulk Density 1.4-1.5 g/cm3 Water To Powder Ratio 1:2 Setting Time 8-12 min Chemical Composition Calcium Sulphate Hemihydrate : CaS04. ½ H2O Drying Type Setting Identification & Packing Xpert is packed in HDPE bags. The outer layer of the bag is printed with the product image, safety instruction, batch number, date of manufacturing, UOM, correspondence address and application instructions. Available Sizes 20 kg & 25 kg Shelf life time Approx. 3 months from the date of manufacture. Page: 1 of 3 Last Modification Date: 20/10/2021 Plasters Gyproc Xpert Stucco Gypsum Plaster BP0006 Coverage Applied Thickness 13 mm Coverage* 15sq-ft/25 kg bag Standard Compliance IS 2547 (Part I)-1976 for chemical characteristics & physical characteristics Application Storage & Handling Background Preparation Surfaces should be reasonably dry, clean and protected from the weather, and suitable for the chosen specification. In addition, before plastering concrete backgrounds, ensure that any mould oil or other agents present are removed from the surface. No-fines concrete does not require wetting prior to plastering. Plaster should not be applied onto a ‘green’ background or when any free water is visible. Clean water should be applied 5-10 minutes before plaster application to control the suction. In-situ or pre-cast concrete which are exceptionally smooth or having low suction will require pre-treatment with Gyproc Bond-It bonding agent. Mixing Gyproc Xpert is pre-mixed with aggregate and only clean water is needed for preparation. Mixing should be carried out in a clean tray or bath. Excessive mechanical mixing should be avoided. Tools and water used in mixing must be clean. Contamination from previous mixes can shorten the setting time and in turn reduce the strength of the plaster when set. Water to plaster ratio (1 part of water: 2 part of plaster by weight) should be maintained to have good cohesive workable mix. Prepare plaster mix as much as required depending upon the immediate scope of work. Once the mix has begun to set, water addition is not recommended, as performance properties of plaster will get altered, thus affecting workability, cohesiveness, adhesion properties and strength. Application Gyproc Xpert should be applied with firm pressure, built out to the required thickness, and ruled to an even surface and left as an undercoat to form a key for finish coat. A thin plaster mix is made and applied as a finish coat to provide smooth surface. It can be applied to an average thickness range of 3-15 mm on walls in one coat and up to 10 mm on ceilings. For punning S/C plaster surface should be wetted before application to provide firm bonding. After complete drying for usually 72 hrs (depends upon thickness and weather conditions) the plain smooth leveled surface is ready for painting.