Woodworking Hot Melt Adhesive

Product Details

 THERMOKOL 2015

 Edge banding glue

DESCRIPTION

TERMOKOL 2015 is a hot melt adhesive for automatic edge banding machines.

APPLICATION

The glue is used for gluing veneer, melamine, polyester, ABS and PVC edges.

TECHNICAL DATA

Type EVA copolymer

Viscosity at 200°C (ASTM D 3236 test) 60,000 - 80,000 mPa s

Softening point (ASTM E-28, ring and ball test) 98 - 108°C

Color / 05….. white

DIRECTIONS FOR USE

Before gluing, the adhesive must reach operating temperature. Lower operating temperatures will result in

unsuccessful gluing, higher temperatures, maintained for some time, cause damage to the glue. At longer

interruptions or deadlocks, it is recommended to lower the operating temperature to 160°C. Because thermostats can give false

temperature, we recommend checking the glue temperature on the roller applicator from time to time. The carrier material must

be dry, dust-free and acclimatized to room temperature (min. 18 °C). Avoid drafts.

To obtain good gluing results, pay attention to the room temperature, the temperature of all

materials and machine manufacturer recommendations. Operating conditions, machine purpose, and type of bonded materials.

have an impact on the gluing results.

material and ambient temperature 18 - 25°C

relative humidity 50 - 60%

moisture content of wood material 8 - 10%

glue quantity 150 - 250 g/m2

operating temperature 170 - 200°C

feed speed from 12 m/min

Deviations from the recommended conditions result in poor bonding.

CLEANING

Melting tanks should be cleaned at regular intervals. Excessive accumulation of char

materials reduces the overall efficiency of the heaters and worsens heat transfer. To remove glue residues when the pot

is cold, we recommend a mixture of methylene chloride and toluene in a 1:1 ratio.

PACKAGING

25 kg plastic bag

STORAGE

TERMOKOL 2015 should be stored in closed, original packaging, in a cool and dry place,

at a temperature below +25 °C, away from heat sources. Shelf life when properly stored

glue is at least 3 years.

Additional Information:

• Production Capacity: 10000