LR-CAL,Germany Digital Multifunction Calibrator, For Laboratory, Model Name/Number: Ltc 100

Service Details

Portable Multifunction Temperatur CalibratorModel LR-Cal LTC 100 The multifunctional Temperature Calibrator LR-Cal  LTC 100 is a high-precision, hand-held calibrator for the calibration and troubleshooting of process control instrumentation. Measuring of Thermocouples, Resistances, Resistance Temperature Detectors RTD, mA, mV and circuit continuity Soursing of Thermocouples, Resistances, RTDs, ma and mV Dual display enables simultaneous input and output view Internal 24V loop supply to power transmitters and measure mA during tests Selectable Step- and Ramp functions Data logging via supplied SD memory card USB interface Powered by chargeable Lithium-Ion battery Graphically trend display LR-Cal LTC 100 MEASURING Range: Accuracy: Resolution: Milliamps mA 0...24 mA (Impedance ±17 Ohm) 0.02% FS 1 µA Millivolts mV -10...+100 mV (> 1 MegaOhm) 0.01% FS 1 µV Thermocouples Types J, K, T, E, N, U, L 0.1% FS *) 0.1°C Thermocouples Types B, R, S 1% FS *) 0.1°C Resistance****) 0...400.00 Ohm0...2200.0 Ohm 0.05% FS0,05% FS 0.01 Ohm0.1 Ohm RTD****) Types Pt50, Pt100, Pt200, Pt500,Pt1000, Ni100, Ni120 0.1% FS 0.01°C Continuity with a 100 Ohm trigger. Visual and audible confirmation  SOURCING Range: Accuracy: Resolution: Milliamps mA 0...24 mA (max. load 500 Ohm) 0.02% FS 1 µA Millivolts mV -10...+100 mV (min. load 100 Ohm) 0.01% FS 1 µV Thermocouples Types J, K, T, E, N, U, L 0.1% FS *) 0.1°C Thermocouples Types B, R, S 1% FS *) 0.1°C Resistance 10.00...400.00 Ohm **)400.0...2200.0 Ohm **) 0.05% FS **)0.05% FS **) 0.01 Ohm0.1 Ohm RTD Types Pt50, Pt100, Pt200, Pt500,Pt1000, Ni100, Ni120 0.1% FS 0.01°C General Data Isolation: Max. 100 VDC between all input and output circuits Thermocouple Extender: Cold junction compensation Pt100 DIN EN 60751, 100 Ohm at 0°C,nom. resistance drift 0.04% after 1000 h at 500°C Power supply Type: Lithium-Ion batteryCharging time: approx. 5 hLife time: typical 8 h (depending on used functions) Mains charger: Charger input at calibrator: 10...15 VDCCharger input: 115...230 VAC; 0.5 A; 50/60 HzCharger output: 12 VDC at 1.5 A Optional car charger: 12 VDC at 1 A via cigarette lighter plug Temperature ranges: Storage: -40...+50°C incl. batteryUsage: 0...50°C Relative humidity: 0...85% r.F. (non-condensing) Housing: ABS-plastic OL94V-0 flame retardant, IP 54 dust and splash proof Rubber boot: green Weight: approx. 340 g