XLR Series Cold And Maturing Room, 5 Ton

Service Details

We are offering XLR Series Cold and Maturing Room to our clients. They are provided with four (XLR130) or six (XLR170) relay outputs to control compressor, defrost - which can be either electrical or hot gas (XLR170) - the evaporator fans (XLR170), the lights, the alarm and an auxiliary output. They are also provided with three NTC or PTC probe inputs, one for temperature control, one to control the defrost end temperature of the evaporator and the third, optional, for the display. There are two digital inputs (free contact) for the door switch and configurable by parameter. The standard TTL output allows the user to connect, by means of a TTL/RS485 external module, a ModBUS-RTU compatible monitoring system and to programme the parameter list with the Hot Key. Each model in the XLR100 can be provided with a Real Time Clock which allows programming of up to eight daily defrost cycles, divided into holidays and workdays. A Day and Night function with two different set points is fitted for energy saving.Features:Advanced multifunction refrigeration controllers suitable for both heating and coolingTemperature control can be performed on probe 1, probe 2 or by the difference between probe 1 and 2Complete compressor and defrost managementMaximum and minimum temperature recordingNo external transformer requiredInstant visibility of machine status via display icons, clear alarm signals thanks to the front lidFast and easy wiringDesigned to be wall or panel mountedStandard communication protocol ModBUS-RTUHot key or Prog tool kit connector for a quick and easy programming10VA max power absorptionDisplay with red LED (30,5mm high) and 11 iconsAdvanced Multifunction Controller for N.t., M.t. and L.t. Cold Rooms. Off Cycle Defrost Digital Controller for Nt 230x210mm Digital inputsAlarm, block alarm, pressure switch, start defrost, energy saving, ON/OFF, AUX, holiday: configurableDoor switch: presentRelay outputsCompressor: 20ALight: 16AAUX: 20AAlarm: 8AOthersHot Key/Prog Tool Kit output: presentSerial output: RS485 optionalBuzzer: presentReal time clock: optional