Lightning Protection Adequacy Study and Design

Service Details

Risk analysis and risk assessment The basis for the planning of lightning and surge protection concepts is a risk analysis as per IS IEC 62305 Part 2 – risk management. The risk potential of structures is accessed after determining the class of LPS. The specific protection can be measured through risk assessment & protection components can be .selected which is economically optimised & adapted to the type of use & building characteristics. It is very important and essential to determine the class of LPS as the class of LPS changes based on the application and use of the infrastructure. Example: A healthcare clinic can be a surgery room as well as a normal medical consultation room. However class of LPS depends on various other factors such as location of the building, dimension of the building, occupancy of the building, and fire risk. The class of protection at the study stage will avoid retrofitting and therefore will save the unnecessary expenditure.The planning service for the protection measures for your project is always based on the risk assessment. 3D planning of lightning protection A 2D plan can of course suffice for some building projects, whereas it is more efficient to observe the building from all the sides and from all angles to get precise basis for the positioning of the air termination rods, down conductors and earthing system. Digitisation of installations by means of 3D simulation Do you have detailed plans and models of your installations and buildings? With 3D laser scanning it is possible to get a precised quantity survey of the existing installation Digitisation of existing buildings through laser scanning Are you planning an annex but have no plans yet? With 3D laser scanning it is possible to get a precise quantity survey of the existing installation. Do you want to check the protected volume of an existing lightning protection system? Produce digital plans using the laser scans for an authoritative basis. Do you need information about areas of the premises that are difficult to access? Laser scanning helps to monitor non accessible areas of the building.