Solid Bitumen

Product Details

We are the eminent distributor and wholesaler of Solid Bitumen, provided in a varying consistency of highly viscous to solid. Widely appreciated for its plasticity, waterproof, resistance, and adhesion towards acids and alkalis, industrial bitumen is very safe and inexpensive. Owing to the high dielectric strength, this product proves to be an excellent electrical insulator.

Features:

Wide application area

Tamper proof packaging

Fats delivery

Applications:

ShaliKote® T-10 / ShaliKote® T-10A is recommended for waterproofing of leaky walls / surfaces or places where heating of bitumen is not desirable or prohibited

Advantages:

ShaliKote® T-10 gives a coating, which, when set, is impermeable to water and remains unaffected by attacks of industrial fumes, saline atmosphere, etc. It resists low temperature cracking and also does not crack under the influence of strong sunlight

ShaliKote® T-10A has smoother finish and better flow as compared to ShaliKote® T-10

Application Methodology:

Wire brush and clean the surface thoroughly to remove all dirt and loose particles

Dilute ShaliKote® T-10 from its pasty consistency to light consistency by adding water in the ratio of 1:1. Apply this diluted material on the roof surface as primer. No dilution should be done in case of ShaliKote® T-10A

When the primed surface is dry and has turned black from its original brown colour, apply ShaliKote® T-10 and allow the emulsion to break. It will turn black from its original brownish colour

When the emulsion has set in, spread coarse sand or crushed stone chips over the surface

Health & Safety:

Lid of the container should be firmly fixed, when not in use

Use goggles and hand gloves during application

Clean hands with water after application

Packaging:

Available in 20 kg and 200 kg drum

Storage:

Keep in cool and dry place in air tight container under shed away from heat

Specifications:

Coverage, kg/m2

On metal surface

On concrete surface

0.4

0.5 Dry film thickness per coat

On metal surface

On concrete surface

120 micron

80 micron

Dry Time, hr

Touch Dry

Hard Dry

8

24 Colour Brown to Chocolate

Consistency Brushable

Specific Gravity 1.01

ShaliKote® T-10A has slightly lower solid content to provide smoother finish and better flow.

Additional Information:

Minimum Order Quantity: 9000 Kilogram(s)

Company Details

Established at Kanpur, Uttar Pradesh, Anand Sales Corporation is a prominent association, engaged in manufacturing, supplying and distributing a comprehensive range of Fiber sheet, metal roofing sheet, GC Sheets, Fiber cement flat boards, cement sheet asbestos, TMT Round Bars, Tar felt rolls, Iron TMT Bars, Supertene membrane, Turbine ventilators