Steel Portable Cabin

Product Details

Material : Steel, FRP

 Surface Treatment : Coated

 Technique : Hot rolled

 Wall Thickness : Up to 7 mm

Product Description

Our company holds vast experience in this domain and is involved in offering Porta Cabin.

Feature:

·         Weatherproof

·         Impact resistance finish

·         Highly portable

Paint:

·         Epoxy Zinc Phosphate primer and synthetic Epoxy paints used for final 2 coats (Corrosion free and fire proof paints)

Insulation:

·         25 mm thick Glass wool insulation used for walls as well as 50 mm thick Glass wool insulation provided for roof.

Inner Panelling:

·         Aesthetically finished Interiors that provide custom built appearance with high quality workmanship

·         All vertical & horizontal corners neatly and smoothly finished with Aluminium sections

·         Panelling of side walls & roof is of 9 mm thick decorative laminated MDF board

Main Entry Door:

·         The door interiors finished with same material matching with that of bunk house interiors

·         Doors provided with locking arrangement with separate handles of both sides of door as required

Aluminium Windows:

·         Aluminium sliding type powder coated windows that are made of aluminium section which is 4 mm thick tinted glass.

Electrical System:

·         Bunk houses provided with concealed electrical copper cables & wiring suitable for 250 volt, 50 HZ single phase AC power supply

·         Copper cables used are of 3/19 cable for lighting circuits

·         ISI mark & concealed PVC conduits insulated copper wire used for wiring in PVC conduit with small size distribution board with MCB protection and to separate with main supply

Base Frame:

·         Base frame used are of pressed mild steel channel section

·         Main structural element are of 'C' Channels 100 mm x 50 mm and cross member is of 'C' channels section size 75 mm x 40 mm

Side and End Walls:

·         Side & end frames made out of pressed sections of suitable profiles/pillars of sufficient strength

·         9 mm MDF board used for interior walls

·         All steel sheets used are treated for corrosion resistance

·         Vertically corrugated Sheet Panels that are continuously welded to top side and base structures to offer better strength to weight ratio

·         All gaps sealed at edges & at seams, bottom etc for preventing ingress of moisture

Flooring Systems:

·         Bottom frame provided of 18 mm thick plywood, bison panel/E board (fixed by means of self taping screws)

·         PVC vinyl flooring fixed on panel

Roof:

·         Interior panelling is done in 9 mm MDF board with adequate insulation

Interested in this product

 Material : Steel, FRP

 Surface Treatment : Coated

 Technique : Hot rolled

 Wall Thickness : Up to 7 mm

Product Description

Our company holds vast experience in this domain and is involved in offering Porta Cabin.

Feature:

·         Weatherproof

·         Impact resistance finish

·         Highly portable

Paint:

·         Epoxy Zinc Phosphate primer and synthetic Epoxy paints used for final 2 coats (Corrosion free and fire proof paints)

Insulation:

·         25 mm thick Glass wool insulation used for walls as well as 50 mm thick Glass wool insulation provided for roof.

Inner Panelling:

·         Aesthetically finished Interiors that provide custom built appearance with high quality workmanship

·         All vertical & horizontal corners neatly and smoothly finished with Aluminium sections

·         Panelling of side walls & roof is of 9 mm thick decorative laminated MDF board

Main Entry Door:

·         The door interiors finished with same material matching with that of bunk house interiors

·         Doors provided with locking arrangement with separate handles of both sides of door as required

Aluminium Windows:

·         Aluminium sliding type powder coated windows that are made of aluminium section which is 4 mm thick tinted glass.

Electrical System:

·         Bunk houses provided with concealed electrical copper cables & wiring suitable for 250 volt, 50 HZ single phase AC power supply

·         Copper cables used are of 3/19 cable for lighting circuits

·         ISI mark & concealed PVC conduits insulated copper wire used for wiring in PVC conduit with small size distribution board with MCB protection and to separate with main supply

Base Frame:

·         Base frame used are of pressed mild steel channel section

·         Main structural element are of 'C' Channels 100 mm x 50 mm and cross member is of 'C' channels section size 75 mm x 40 mm

Side and End Walls:

·         Side & end frames made out of pressed sections of suitable profiles/pillars of sufficient strength

·         9 mm MDF board used for interior walls

·         All steel sheets used are treated for corrosion resistance

·         Vertically corrugated Sheet Panels that are continuously welded to top side and base structures to offer better strength to weight ratio

·         All gaps sealed at edges & at seams, bottom etc for preventing ingress of moisture

Flooring Systems:

·         Bottom frame provided of 18 mm thick plywood, bison panel/E board (fixed by means of self taping screws)

·         PVC vinyl flooring fixed on panel

Roof:

·         Interior panelling is done in 9 mm MDF board with adequate insulation

Interested in this product