Asianpaints damp Block 2k Lasting Protection Against Efflorecence High Performance WaterproofCoating

Service Details

 91 000 74051 SmartCare Damp Block 2K - Two-Component Cementitious Waterproofing Coating is a powerful, two-part waterproofing coating (a powder and a liquid) that you mix together. It creates a highly flexible, seamless barrier that stops water seepage effectively, even under high pressure. It is ideal for waterproofing bathroom floors, balcony slabs, terrace roofs, and basement walls from both the positive (water-facing) and negative (opposite) sides.Key Benefits:Stops High-Pressure Water: Resists water pressure up to 5 bars, perfect for sunken areas and basements.Highly Flexible: Stretches up to 100% to bridge small cracks (up to 1.2mm) without tearing.Positive & Negative Side Waterproofing: Can be applied on the side where water enters or the opposite side.Excellent Adhesion: Bonds strongly to concrete, brick, and plaster surfaces.Prevents Efflorescence: Stops white salt stains caused by moisture.Approximate Market Price: 1200 TO 1600RS per PACK (Price varies based on pack size. Please contact CIVILIZEMART for the best quote!)Questions and Answers:Q1: What is SmartCare Damp Block 2K used for?A: It is used for permanent waterproofing of surfaces like bathroom sunken floors, balconies, terraces, basement walls, and water tanks. It is unique because it works for waterproofing from both the same side as the water (positive) and the back side (negative).Q2: How do I mix the two components?A: Always add the powder (Part A) to the liquid (Part B). The mixing ratio is 2 parts powder to 1 part liquid by weight. Stir thoroughly to make a smooth, lump-free paste.Q3: What is the coverage area?A: For two coats, the coverage is approximately 7.5 - 8 square feet per kilogram. This means a 15kg pack will cover about 112-120 square feet with two coats.Q4: What is the approximate price?A: The approximate market price is around 1200 to 1600 per PACK. The 3kg pack is ideal for small repairs, while the 15kg pack is more economical for larger areas. Message CIVILIZEMART us for the exact price.Q5: Can it be applied on damp walls from the inside?A: Yes! This is a key feature. It is designed for negative side waterproofing, meaning you can apply it on the inner side of a wall (like a bedroom wall behind a bathroom) to stop dampness seeping through from the outside.Q6: How long does it take to dry?A: The first coat will be dry to touch in 4-6 hours. You can then apply the second coat. The second coat should be cured (kept moist) for 3-5 days for best results.Q7: Is it safe to use?A: It is safe when used correctly. Avoid ingestion and contact with eyes. Wear gloves and safety glasses during application. If contact occurs, rinse thoroughly with water.Q8: What pack sizes are available?A: It is conveniently available in 3kg and 15kg kits.Q9: Can it cover cracks?A: Yes, its flexible film can bridge hairline cracks up to 1.2 mm wide. Larger cracks must be filled with a repair mortar before application.