Share Your Requirements
For a Quick response, Please fill up the details below.
Top Products from Ambition Metal
Cupro Nickel Tubes
₹ 700
| Availability : In Stock |
| Elongation : Greater Than or Equal 40% |
| Material : Cupro Nickel Alloy |
| Outside Diameter : 1/4 to 41/8 inch |
Copper Earthing Lightning Arrester
₹ 100
| Air Rod Diameter : 100 mm |
| Air Rod Height : 300 mm |
| Availability : In Stock |
| Corresponding Radius Protection : 2.14 h |
Copper Wires
₹ 550
| Alloy Or Not : Non Alloy |
| Availability : In Stock |
| Diameter : 1-3 mm |
| Flame Retardant : Yes |
Aluminium Brass Tubes, Size/Diameter: 3 to 10 Inch
₹ 700
| Availability : In Stock |
| Corrosion Resistance : Yes |
| Hollow Section : Circular |
| Material : Aluminium Brass Alloy |
Admiralty Brass Pipes, Wall Thickness: 0.35 mm - 5 mm
₹ 200 / Kilogram
| Availability : In Stock |
| Is It Leak Proof : Leak Proof |
| Is It Rust Proof : Rust Proof |
| Material : Admiralty Brass Alloy |
Copper Coils
₹ 930
| Alloy : Without Alloy |
| Availability : In Stock |
| Feature : Corrosion Resistant |
| Material : Copper |
Aluminium Foils
₹ 300
| Availability : In Stock |
| Material : Aluminium |
| Thickness : Up to 10 mm |
| Type : Roll |
Copper Current Lightning Arrester
₹ 500
| Availability : In Stock |
| Current Gradient : Less Than 50 KA |
| Grounding Resistance : Less Than 10 Ohm |
| Height : 200 mm |
Chromium Zirconium Copper Plates
₹ 700 / Kilogram
| Availability : In Stock |
| Chemical Composition : Cr 0.50-1.50% Zr 0.05-0.25% Cu |
| Material Grade : C18150 |
| Melting Point : 1080 Deg C |
Beryllium Copper Alloy Beryllium Copper Pipes, Size: > 4""
₹ 1,710 / Kilogram
| Alloy Or Not : Is Alloy |
| Availability : In Stock |
| Is It Rust Proof : Rust Proof |
| Material : Beryllium Copper Alloy |
Coil Pan India Copper Capillary Tubes, Size/Diameter: 0.5 inch
₹ 1,020
| Alloy Or Not : Is Alloy |
| Availability : In Stock |
| Size/Diameter : 0.5 inch |
| Type : Coil |
Copper Round Bars
₹ 900
| Availability : In Stock |
| Diameter Copper Rod : 5/32 Inch |
| Diameter : 5 - 20 mm |
| Finishing : Polished |
0.5 - 80 mm Titanium Sheet
₹ 700
| Availability : In Stock |
| Boiling Point : 3535 Deg C |
| Material : Titanium |
| Melting Point : 1080 Deg C |
Titanium Tubes
₹ 700
| Availability : In Stock |
| Grade : Titanium Gr 1, 2, 5, 7, 9, 12, 23 |
| Material : Titanium |
| Outer Diameter : 3.0 mm - 114.3 mm |
Titanium Pipes
₹ 700
| Availability : In Stock |
| Density : 4.5 G/cm cubic |
| Elongation : 20 % |
| Melting Point : 1665 Deg C (3030 Deg F) |
Aluminum Square Tube, Length: 3 m, 0.5 inch
₹ 450 / Kilogram
| Alloy Or Not : Is Alloy |
| Availability : In Stock |
| Country of Origin : Made in India |
| Length : 3 m |
Heater Brass Pipes
₹ 700
| Availability : In Stock |
| Is It Leak Proof : Leak Proof |
| Is It Rust Proof : Rust Proof |
| Material : Brass |
Brass Pipes
₹ 700
| Availability : In Stock |
| Is It Leak Proof : Leak Proof |
| Is It Rust Proof : Rust Proof |
| Material : Brass |
3-5 mm 5-10 Non Alloy Copper Wire
₹ 850
| Alloy Or Not : Non Alloy |
| Availability : In Stock |
| Diameter : 3-5 mm |
| Insulation : Yes |
FAQs On Ambition Metal
Where is Ambition Metal located?
The location of the Ambition Metal is Forth floor, Flat no 420, D wing, Shreepal nagar,, Saibaba mandir Road , Borivali west, Mumbai, Mumbai Suburban, Maharashtra, 400092.
What is the GST Number of the Ambition Metal?
The GST Number of the Ambition Metal is 27AQQPJ5319M1Z8.
What is the nature of the business of Ambition Metal?
The nature of the business of Ambition Metal is manufacturing.
What are the main categories in which Ambition Metal deals?
Ambition Metal specializes in a diverse range of categories, including Brass Ring, Iron Steel Bars and Test Tube Stand.
Is Ambition Metal a verified manufacturer on Aajjo?
Yes, Ambition Metal is a verified and trusted manufacturer listed on Aajjo.
