GST : 07AAACF0240N2ZT
Forech India Private Limited proudly presents its exclusive range of Conveyor Belt & Pipe Conveyors. Crafted from the highest quality materials, these top-tier products deliver exceptional performance and durability.
Conveyor Systems & Components
Forech Chevron Conveyor Belt
₹ 5,000 / Meter
| Belt Width (mm) A1 : 600-800 |
| Brand : Forech |
| Cleat Height (mm) C1 : 15 |
| Cleat Thickness (mm) D1 : 20 |
Forech Sidewall Conveyor Belts
₹ 101 / Square Meter
| Average Belt Life : 0.5 to 3 year |
| Base Width (bw) : 50 to 100 mm |
| Brand : Forech |
| Height (Swh) : 60 to 400 mm |
Pipe Conveyor Belts
₹ 40,000
| Belt Width (mm) : 600 to 2500 |
| Conveyed Quantity (m3/hr) 1m/sec at 75% Fill Factor : 45 to 1190 |
| Conveyed Quantity (m3/hr1m/sec at 60% Fill Factor : 36 to 950 |
| Maximum Lump Size (mm) : 40 to 230 |
Steel Cord Conveyor Belt
₹ 2,000 / Meter
| Belt width (mm) : 800 to 2400 |
| Min. recommended pulley diameters (mm) for mawt utilisation greater-than 60% : 315 to 2000 |
| Pitch (mm) minus-plus 1.5 : 12 to 17 |
| Recommended Order Quantity : 600 |
Straight Warp Conveyor Belts
₹ 500 / Meter
| Belt Type : Sw 400/1, Sw 500/1, Sw 630/1 |
| Bottom Cover : 3, 2 |
| Fabric : Sw 400, Sw 500, Sw 630 |
| Material : Nylon, Polyester |
Geotextile, Geogrids & Pond Liners
Ceramic Wear Liners
₹ 500 / Square Feet
| Abrasion by Impingement : 0.05 grams max. |
| Abrasion by Rubbing : 0.1 grams max. |
| Abrasion Loss : 150 mm3 at 10 N |
| Aluminium Oxide (min) Al2 O3 : 92% |
Rubber Wear Liners
₹ 500 / Square Feet
| Brand : Forech |
| Country of Origin : Made in India |
| Length : 1000 to 2000 mm |
| Material : Rubber |
Forech Pressure Bar Lifter
₹ 1,200
| Brand : Forech |
| Material : Rubber |
| Standard Length : 1500 mm and 1220 mm |
| Standard Thickness : 75 mm to 150 mm |
Material Handling Machines & Systems
Special Profile Weigh Feeder Belts
₹ 1,00,000
| Belt Width (mm) A1 : 900-1200 |
| Belt Width : 600-1800 mm |
| Cleat Height (mm) C1 : 15 |
| Cleat Thickness (mm) D1 : 20 |
Rubber & Rubber Products
Pulley Lagging Sheet
₹ 150 / Meter
| Abrasion Loss mm3 : 90 Max to 200 Max. |
| Crescent Tear N/mm : 30 Min to 80 Min |
| Density g/cm3 : 1.10 Plus-Minus 0.03 to 1.21 Plus-Minus 0.03 |
| Elongation at Break% : 400 Min to 450 Min |
Ceragrip Ceramic Lagging
₹ 150 / Meter
| Bare Steel Pulley : 0.25,0.15 |
| Brand : Forech India Private Limited |
| Ceramic Lagging : 0.75,0.55 |
| Co-efficient of - Friction : Dry,Wet |
Patterned Sheet Pulley Lagging
₹ 100 / Meter
| Abrasion Loss (mm) : 90 Max to 150 Max |
| Crescent Tear (N/mm ) : 40 Min. to 80 Min. |
| Elongation at Break % : 400 Min to 450 Min |
| Finish on face : Plain |
Share Your Requirements
For a Quick response, Please fill up the details below.
